Quelpr

CSEC Mathematics · vectors and matrices

Magnitude of a Vector

Calculate the length or magnitude of any 2D vector, find unit vectors in a given direction, and solve for unknown components.
15 min Syllabus: calculate the magnitude of a vector including unit vectors

Before you start

A position vector OP⃗=(xy​) represents the displacement of a point P(x,y) from the origin O(0,0). The vector between any two points A and B is given by AB⃗=OB⃗−OA⃗.

Builds on: Position Vectors

1. What is Magnitude and How Do We Find It?

The magnitude of a vector is simply its length or size. Because vectors have both size and direction, magnitude tells us 'how far' without worrying about 'which way'.

We write the magnitude of a vector v using vertical bars: ∣v∣ or ∣AB⃗∣.

When a vector is written in column form (xy​), the top number is the horizontal displacement and the bottom number is the vertical displacement. Together with the vector itself, these form a right-angled triangle where the vector is the hypotenuse.

By Pythagoras' theorem, the magnitude is:

∣v∣=√x2+y2​

Remember that squaring any real number (positive or negative) always gives a non-negative result. Magnitude is always a positive scalar or zero.

A right-angled triangle formed by vector v from the origin to point (4, 3), with a horizontal base of 4 and a vertical height of 3.-112345-112340xy(4, 3)vx = 4y = 3

Worked example

Calculate the magnitude of the vector w=(−512​).

  1. Identify the components: x=−5 and y=12.
  2. Apply the magnitude formula: ∣w∣=√(−5)2+(12)2​.
  3. Square each component: (−5)2=25 and 122=144.
  4. Add the squares: 25+144=169.
  5. Take the positive square root: √169=13 units.

Answer: ∣w∣=13 units

Quick check

Find the magnitude of the vector m=(9−12​).

units

2. Magnitude of Displacement Between Two Points

In CSEC exam questions, you are often given the coordinates of two points, say A and B, and asked to find the magnitude ∣AB⃗∣.

To solve these questions:
1. Write down the position vectors OA⃗ and OB⃗.
2. Find the displacement vector AB⃗ using the triangle law: AB⃗=OB⃗−OA⃗.
3. Calculate the magnitude using ∣AB⃗∣=√x2+y2​.

This method is frequently used in coordinate geometry to calculate the distance between two points, or to prove that a triangle is isosceles by showing two sides have equal magnitude.

Worked example

The coordinates of points P and Q relative to an origin O are P(2,−1) and Q(5,3) respectively. Calculate the magnitude of the vector PQ⃗​.

  1. State position vectors: OP⃗=(2−1​) and OQ⃗​=(53​).
  2. Find PQ⃗​=OQ⃗​−OP⃗=(53​)−(2−1​).
  3. Subtract components: PQ⃗​=(5−23−(−1)​)=(34​).
  4. Calculate magnitude: ∣PQ⃗​∣=√32+42​=√9+16​=√25=5 units.

Answer: ∣PQ⃗​∣=5 units

Quick check

Point R has coordinates (1,4) and point S has coordinates (7,12). Calculate the magnitude of the vector RS⃗.

units

3. Unit Vectors

A unit vector is any vector that has a magnitude of exactly **1 unit**.

The base unit vectors along the x-axis and y-axis are denoted by i=(10​) and j=(01​).

To find a unit vector in the direction of any non-zero vector a, we divide the vector by its own magnitude. This scales the vector down to length 1 while keeping its direction unchanged:

a^=∣a∣a​=∣a∣1​a

The little hat notation a^ means 'unit vector in the direction of a'.

Worked example

Given the vector u=3i−4j, find a unit vector in the direction of u.

  1. Write u in column vector form: u=(3−4​).
  2. Find the magnitude of u: ∣u∣=√32+(−4)2​=√9+16​=√25=5.
  3. Divide u by its magnitude: u^=51​(3−4​)=(53​−54​​).
  4. Check the magnitude of u^: √(53​)2+(−54​)2​=√259​+2516​​=√1=1.

Answer: u^=51​(3i−4j) or (53​−54​​)

Quick check

Which of the following is a unit vector?

4. Finding Unknown Components Using Magnitude

CSEC exams often give you the magnitude of a vector and ask you to calculate an unknown component inside it.

To solve these problems:
1. Set up the equation using ∣v∣=√x2+y2​.
2. Square both sides to eliminate the square root: ∣v∣2=x2+y2.
3. Solve the resulting equation for the unknown.

Take note: when you take the square root of both sides to find an unknown component, there are usually two possible values (positive and negative), unless the question specifically restricts the answer.

Worked example

The vector a=(k8​) has a magnitude of 10 units. Calculate the possible values of k.

  1. Write the equation for magnitude: ∣a∣=√k2+82​=10.
  2. Square both sides: k2+64=100.
  3. Subtract 64 from both sides: k2=100−64=36.
  4. Take the square root of both sides: k=±√36=±6.

Answer: k=6 or k=−6

Quick check

The vector v=(−8y​) has a magnitude of 17 units. Given that y>0, calculate the value of y.

Common mistakes

  • Entering negative numbers into the calculator without brackets: writing −52 gives −25 instead of (−5)2=25. Squaring any vector component must always result in a positive value.
  • Forgetting to take the square root at the end of the calculation, leaving ∣v∣=x2+y2 instead of √x2+y2​.
  • Missing the negative solution when solving for an unknown component. If k2=25, k can be +5 or −5 unless restricted.

In the exam

  • Always write down the formula ∣v∣=√x2+y2​ and show the substituted values to secure method marks.
  • Leave your answer as an exact surd (e.g. √74) unless the question specifies decimal places or significant figures (e.g. 'to 3 significant figures').
  • Include 'units' in your final answer if units of length are not specified.

Key terms

Magnitude
The length or size of a vector, represented as ∣v∣.
Unit Vector
A vector whose magnitude is exactly 1 unit, denoted v^=∣v∣v​.
Scalar
A quantity that has magnitude only and no direction (e.g. a plain number).

Practice

Easier to harder. Use paper for your working.

Practice 1

The position vector of a point R relative to the origin O is OR⃗=(−724​). Calculate the magnitude ∣OR⃗∣.

units

Practice 2

A ferry sails from Kingstown A(1,3) to a reef at B(9,9) on a navigational map. Calculate the direct distance ∣AB⃗∣ in map units.

units

Practice 3

The vector u=(pp+2​) has a magnitude of 10 units. Given that p is positive, calculate the value of p.

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q11 11(b)(i) · 1 markThe position vectors of the points R, S and T, relative to an origin, O, are R=(-3, 4), S=(1, 1) and T=(5, -2) respectively. Calculate the value of |OR|.
  • Mathematics Q13 13(b)(iii) · 2 marksThe point R has coordinates (8,9). Determine the magnitude of the vector PR.
  • Mathematics Q13 13(c) · 3 marksCalculate the values of p for which |AC| = 10.

Finished the lesson?

0 of 7 checks right on this device.

Read more

  • Collins - Concise Revision Course for CSEC Mathematics, pp. 438, 439
  • CSEC Maths Study Guide - Maths Crash Course, pp. 266, 270, 271
  • precalculus-2e_-_WEB, p. 883
  • Mathematics for CSEC, p. 410