Quelpr

CSEC Mathematics · vectors and matrices

Position Vectors

Represent points as position vectors relative to the origin, and calculate displacement vectors between any two points in column matrix form.
15 min Syllabus: represent position vectors and displacement vectors in column matrix form

Before you start

Recall that a vector has both magnitude (length) and direction. In column matrix form (xy​), the top number gives the horizontal movement (right is positive, left is negative) and the bottom number gives the vertical movement (up is positive, down is negative).

Builds on: Concepts of Vectors

1. Understanding Position Vectors

In coordinate geometry, we describe locations using coordinates like (x,y) on a grid. In vector geometry, we fix a reference point called the origin, O(0,0).

A position vector is a vector that starts at the origin O and points directly to a specific point. If a point P has coordinates (x,y), its position vector is written as OP⃗ or in bold lowercase p:

OP⃗=p=(xy​)

Notice the difference in notation:

  • Coordinates use parentheses with a comma horizontally: (x,y).
  • Position vectors use a column matrix vertically without commas or fraction lines: (xy​).
Position vector OA from the origin (0, 0) to the point A(4, 3)246-1123450xyO(0, 0)A(4, 3)OA

Worked example

A surveyor marks two points on a map grid: the base of a cell tower at T(5,−2) and a water tank at W(−3,4). Write down the position vectors OT⃗ and OW⃗ in column vector form.

  1. Identify the coordinates of point T: x=5 and y=−2.
  2. Write OT⃗ by placing x on top and y at the bottom: OT⃗=(5−2​).
  3. Identify the coordinates of point W: x=−3 and y=4.
  4. Write OW⃗ in column form: OW⃗=(−34​).

Answer: OT⃗=(5−2​) and OW⃗=(−34​)

Quick check

If point K has coordinates (−7,9), what is the position vector OK⃗ in column matrix form?

2. Finding Displacement Vectors: AB⃗=OB⃗−OA⃗

A displacement vector represents the straight-line journey from one point to another, such as AB⃗ (from point A to point B).

Using the triangle law of vectors, to travel from A to B via the origin O, we go:

AB⃗=AO⃗+OB⃗

Since travelling backwards along OA⃗ is the negative vector (−OA⃗), we get the fundamental relationship:

AB⃗=−OA⃗+OB⃗=OB⃗−OA⃗

A simple rule to remember is: End vector minus Start vector (or *Second minus First*).

If OA⃗=(x1​y1​​) and OB⃗=(x2​y2​​), then:

AB⃗=(x2​y2​​)−(x1​y1​​)=(x2​−x1​y2​−y1​​)
Triangle showing vectors OA, OB, and displacement vector AB connecting points A(1, 2) and B(5, 5)2462460xyOA(1, 2)B(5, 5)OAOBAB

Worked example

The points P and Q have coordinates P(2,−3) and Q(6,5) relative to an origin O. Express the displacement vector PQ⃗​ in the form (xy​).

  1. Write down the position vectors of each point: OP⃗=(2−3​) and OQ⃗​=(65​).
  2. Apply the displacement formula: PQ⃗​=OQ⃗​−OP⃗.
  3. Substitute the column vectors: PQ⃗​=(65​)−(2−3​).
  4. Subtract the corresponding components: top is 6−2=4; bottom is 5−(−3)=5+3=8.

Answer: PQ⃗​=(48​)

Quick check

Points M and N have position vectors OM⃗=(−14​) and ON⃗=(51​). Find the vector MN⃗ in the form (xy​).

3. Magnitude and Parallel Vectors

Once you have expressed a vector in column form v=(xy​), you can easily calculate its size and test geometric properties:

1. Magnitude (Length): By Pythagoras' theorem, the magnitude of v, written as ∣v∣, is:

∣v∣=√x2+y2​

2. Parallel Vectors: Two vectors a and b are parallel if one is a scalar multiple of the other:

a=kb

where k is a non-zero constant.

3. Collinear Points: If two vectors share a common point (for instance, AB⃗ and BC⃗) and are parallel (AB⃗=kBC⃗), then the points A, B, and C lie on the same straight line (collinear).

Worked example

The position vectors of points A, B, and C relative to the origin are OA⃗=(12​), OB⃗=(48​), and OC⃗=(714​).
(a) Express AB⃗ and BC⃗ in column form.
(b) Hence, show that A, B, and C are collinear.

  1. Find AB⃗=OB⃗−OA⃗=(48​)−(12​)=(36​).
  2. Find BC⃗=OC⃗−OB⃗=(714​)−(48​)=(36​).
  3. Notice that AB⃗=BC⃗ (scalar multiple k=1), which means AB⃗ is parallel to BC⃗.
  4. State clearly: Since AB⃗ and BC⃗ are parallel and share the common point B, points A, B, and C are collinear.

Answer: (a) AB⃗=(36​) and BC⃗=(36​). (b) Since AB⃗=BC⃗ and point B is common, A, B, and C lie on the same straight line.

Quick check

Find the magnitude of the displacement vector RS⃗=(6−8​).

units

Common mistakes

  • Subtracting in the wrong order: writing AB⃗=OA⃗−OB⃗ instead of OB⃗−OA⃗. Always remember: 'Destination minus Origin' or 'Second minus First'.
  • Writing column vectors with fraction lines or commas, like (yx​​) or (x,y). In CSEC, column vectors must be two distinct entries stacked vertically in brackets.
  • Making sign errors when subtracting negative numbers or squaring negatives. For example, 3−(−5)=8 (not −2), and (−4)2=+16 (not −16).

In the exam

  • Always state the vector route first (e.g., AB⃗=OB⃗−OA⃗). Even if you make an arithmetic error when subtracting, you will earn the method mark.
  • When asked to prove that points A,B,C are collinear, you must state TWO facts: (1) one vector is a scalar multiple of the other (they are parallel), and (2) they share a common point.
  • Leave magnitudes in exact surd form (like √13) unless the question specifically asks for an answer to a certain number of decimal places or significant figures.

Key terms

Position Vector
A vector that gives the position of a point relative to the origin O(0,0), written as OP⃗=(xy​).
Displacement Vector
The direct vector connecting an initial point A to a terminal point B, calculated as AB⃗=OB⃗−OA⃗.
Scalar Multiple
A vector multiplied by a real number k. If a=kb, the two vectors are parallel.
Collinear Points
Points that lie on the exact same straight line.

Practice

Easier to harder. Use paper for your working.

Practice 1

The coordinates of points A and B are A(3,−2) and B(−1,5). Express the displacement vector AB⃗ in the form (xy​).

Practice 2

The position vectors of points C and D relative to the origin are OC⃗=(12​) and OD⃗=(46​). Calculate the magnitude of the displacement vector CD⃗.

units

Practice 3

The position vectors of R, S, and T are OR⃗=(21​), OS⃗=(63​), and OT⃗=(147​). Which statement correctly justifies that R, S, and T are collinear?

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q11 11(a)(i) · 3 marksThe position vectors of points A, B and C, relative to the origin O, are OA = (-2, 2), OB = (6, 1) and OC = (10, 4) respectively. Express in the form (x, y) the vectors AB and AC.
  • Mathematics Q11 11(b)(ii) · 2 marksThe position vectors of the points R, S and T, relative to an origin, O, are R=(-3, 4), S=(1, 1) and T=(5, -2) respectively. Express in the form [x, y], the vectors RS and ST. RS…
  • Mathematics Q11 11(b)(i) · 2 marksOM and ON are position vectors with respect to the origin, O, such that OM = m and ON = n. L is a point on MN such that ML : LN = 2 : 1. Draw a sketch of the triangle OMN and…

Finished the lesson?

0 of 6 checks right on this device.

Read more

  • Collins - Concise Revision Course for CSEC Mathematics, pp. 440, 453, 463
  • Mathematics for CSEC, p. 410
  • CSEC Maths Study Guide - Maths Crash Course, p. 270