Quelpr

CSEC Mathematics · measurement

Volume of Solids

Calculate the volume and capacity of prisms, cuboids, cylinders, pyramids, cones, and spheres using standard formulae.
15 min Syllabus: calculate volumes of prisms, cuboids, cylinders, pyramids, cones, and spheres

Before you start

Volume builds directly on finding the area of plane shapes like rectangles, triangles, and circles. Remember that area measures two-dimensional surface space, whereas volume measures the three-dimensional space enclosed inside a solid.

Builds on: Area of Plane Shapes

1. Prisms and Cylinders

A prism is a 3D solid with a uniform cross-section throughout its entire length. This means if you slice across the solid parallel to its end faces at any point, the shape and area of the slice remain identical.

The master formula for any prism is:

Volume=Cross-Sectional Area×Length=A×l

Common prisms tested on CSEC include:

  • Cube: Edge length s, so Volume=s×s×s=s3.
  • Cuboid: Rectangular prism with length l, width w, and height h, so Volume=l×w×h.
  • Cylinder: A circular prism where the cross-section is a circle of radius r. With area A=πr2, its formula is:
Volume=πr2h
  • Triangular Prism: Cross-section is a triangle of base b and height ht​, so Volume=(21​bht​)×l.

Worked example

A cylindrical oil drum in Kingston has a diameter of 56 cm and a height of 100 cm. Taking π=722​, calculate the volume of the drum in cm3.

  1. Find the radius: r=256​=28 cm.
  2. State the formula: Volume=πr2h.
  3. Substitute the dimensions: Volume=722​×282×100.
  4. Evaluate: 722​×784×100=22×112×100=246400 cm3.

Answer: 246,400 cm³

Quick check

A triangular prism has a triangular face with base 6 cm and perpendicular height 4 cm. If the length of the prism is 15 cm, calculate its volume in cm3.

cm³

2. Pyramids and Cones

Pyramids and cones do not have uniform cross-sections; they taper uniformly from a flat base up to a single point called the apex.

The volume of any tapering solid is exactly one-third the volume of a prism with the identical base and height:

Volume=31​×Base Area×h=31​Ah
  • Right Pyramids: The base may be a square, rectangle, or triangle. For a rectangular base with length l and width w, Volume=31​lwh.
  • Cone: The base is a circle of radius r, so the base area is πr2. Its volume is:
Volume=31​πr2h

*Crucial Exam Note:* Always use the vertical (perpendicular) height h in the volume formula, never the slant height s. If the question gives the slant height, use Pythagoras' theorem first: h=√s2−r2​.

Worked example

A cone-shaped paper cup has a base radius of 7 cm and a slant height of 25 cm. Using π=722​, calculate the volume of the cup.

  1. Find the perpendicular height h using Pythagoras' theorem: h=√252−72​=√625−49​=√576=24 cm.
  2. Apply the cone volume formula: Volume=31​πr2h.
  3. Substitute the values: Volume=31​×722​×72×24.
  4. Simplify: 31​×154×24=154×8=1232 cm3.

Answer: 1232 cm³

Quick check

A pyramid has a rectangular base measuring 8 cm by 5 cm and a vertical height of 9 cm. What is the volume of the pyramid in cm3?

cm³

3. Spheres and Hemispheres

A sphere is a completely symmetrical solid with every point on its surface equidistant from its centre. It has no flat faces and depends only on its radius r.

The volume of a sphere is given by:

Volume=34​πr3

A hemisphere is half of a sphere, formed by cutting a sphere across a plane through its centre. Its volume is half that of a sphere:

Volume of hemisphere=21​×(34​πr3)=32​πr3

Remember to check whether the examination problem provides the radius or the diameter. If diameter is given, divide by 2 before substituting into the formula.

Worked example

A spherical decorative garden globe has a radius of 10.5 cm. Taking π=722​, calculate its volume.

  1. Express the radius as an improper fraction for cleaner calculation: r=10.5=221​ cm.
  2. State the volume formula: Volume=34​πr3.
  3. Substitute r: Volume=34​×722​×(221​)3=34​×722​×89261​.
  4. Simplify the factors: 2188​×89261​=11×441=4851 cm3.

Answer: 4851 cm³

Quick check

A solid bowl is in the shape of a hemisphere with radius 3 cm. Using π=3.142, calculate its volume in cm3 correct to 1 decimal place.

cm³

4. Capacity and Hollow Containers

CSEC examination questions frequently test practical applications involving capacity, liquid flow, and hollow objects:

  • Capacity: Capacity measures how much liquid a container can hold. The fundamental conversion factor is:
1000 cm3=1 litre

To convert from cm3 to litres, divide by 1000. To convert from litres to cm3, multiply by 1000.

  • Internal vs External Volume: For an open tank or pipe with walls of uniform thickness:
  • The internal dimensions give the liquid capacity of the container.
  • The volume of material used to build the container is:
Volume of Material=External Volume−Internal Volume

Pay close attention to thickness: for an open container with a base of thickness t, the internal height is the external height minus t (only one base, no lid!).

Worked example

An open cylindrical container has an external radius of 15 cm, an internal radius of 14 cm, an external height of 51 cm, and a flat base of thickness 2 cm. Using π=722​, calculate:
(a) the capacity of the container in litres;
(b) the volume of material used to make the container, to the nearest whole cm3.

  1. Determine the internal height: hinternal​=51−2=49 cm.
  2. Calculate internal volume: Vint​=πr2h=722​×142×49=722​×196×49=30184 cm3.
  3. Convert to litres: Capacity=100030184​=30.184 litres.
  4. Calculate external volume: Vext​=πR2H=722​×152×51=722×225×51​=7252450​≈36064.29 cm3.
  5. Find volume of material: Vmaterial​=36064.29−30184=5880.29≈5880 cm3.

Answer: (a) 30.184 litres, (b) 5880 cm³

Quick check

A rectangular water cistern has internal dimensions 80 cm×50 cm×45 cm. What is its capacity in litres?

litres

Common mistakes

  • Using diameter instead of radius in circle, cylinder, cone, and sphere formulae. Always halve the diameter first.
  • Using slant height instead of vertical perpendicular height in cone and pyramid volume calculations.
  • Cubing the radius when squaring is required, or squaring the radius in the sphere formula (which requires r3).
  • Forgetting to divide by 1000 when converting internal volume in cm3 to capacity in litres.

In the exam

  • Always state the general formula before substituting numbers. Even if your arithmetic slips, CXC awards method marks for selecting the correct formula.
  • Follow the given instruction for π: if the paper specifies π=722​ or π=3.142, use that exact value. If none is given, use the calculator's π button.
  • Include cubic units (such as cm3, m3) or liquid units (litres) explicitly in final answers.

Key terms

Uniform Cross-Section
A constant 2D shape produced by cutting straight across a solid parallel to its end faces.
Prism
A solid with identical parallel end faces and a uniform cross-section throughout its length.
Capacity
The internal volume of a hollow container, representing the maximum volume of liquid it can hold.
Apex
The highest vertex of a cone or pyramid where all the triangular faces or curved sides meet.

Practice

Easier to harder. Use paper for your working.

Practice 1

What is the volume, in cm3, of a solid cube with an edge length of 6 cm?

Practice 2

A solid cone has a base radius of 7 cm and a vertical height of 12 cm. Using π=722​, calculate the volume of the cone in cm3.

cm³

Practice 3

A solid metal sphere of radius 3 cm is melted down and recast into a solid cylinder of radius 2 cm. Calculate the height of the cylinder in cm.

cm

Now try real past-paper questions

3 Paper 2 questions and 3 Paper 1 multiple-choice on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q6 6(c) · 3 marksAn open cylindrical container made of metal has a circular base and uniform thickness. Its length from top to outer bottom is 120 cm and the inner and outer radii are 14 cm and 15…
  • Mathematics Q5 5(b)(i) · 3 marksA tank has a cross section with dimensions identical to the polygon EFGHIJ in 5(a). Water is poured into the tank at a rate of 75 cm³ per second. After 52 seconds the tank is 2/5…
  • Mathematics Q4 4(c) · 2 marksCalculate the internal volume of the box.

Finished the lesson?

0 of 7 checks right on this device.

Read more

  • CSEC Maths Study Guide - Maths Crash Course, pp. 78, 84, 86, 87
  • CSEC Mathematics Study Guide - The Student Hub - CSEC Mathematics Formula Booklet Kerwin Springer, p. 5
  • Collins - Concise Revision Course for CSEC Mathematics, pp. 224, 297
  • CXC Study Guide - Mathematics for CSEC, p. 53
  • Mathematics for CSEC, p. 90