Quelpr

CSEC Mathematics · measurement

Measurement Problems

Solve multi-step CSEC examination problems involving compound shapes, internal versus external dimensions, container capacity, and density.
15 min Syllabus: solve complex problems involving perimeter, area, and volume of compound shapes and solids

Before you start

You already know how to calculate the perimeter and area of basic plane shapes (rectangles, triangles, circles) and the surface area and volume of basic solids (prisms, cylinders, cuboids).

Builds on: Perimeter of Plane Shapes, Area of Plane Shapes, Surface Area of Solids, Volume of Solids, Time, Distance and Speed, Scales and Scale Drawings

1. Compound 2D Shapes and Dimension Changes

A compound shape (or composite shape) is made up of two or more simple shapes combined together. In CSEC examination questions, you will typically need to:

  • Add areas when simple regions are joined together.
  • Subtract areas when a hole, sector, or corner is cut away from a larger shape.
  • Trace only the outside boundary when calculating perimeter. Never add inner dividing lines to the perimeter!

Paper 1 also frequently tests how area changes when side lengths change. Remember: if the length is multiplied by a factor a and the width by a factor b, the new area is multiplied by a×b.

A vertical plaque shaped as a rectangle with a semicircular top.ABCDO14 cm20 cm20 cm

Worked example

A wooden decorative plaque consists of a rectangular base measuring 14 cm wide and 20 cm high, topped with a semicircle of diameter 14 cm. Using π=722​, calculate:
(a) the total perimeter of the plaque,
(b) the total area of the plaque.

  1. Radius of the semicircular top: r=14÷2=7 cm
  2. Curved boundary of semicircle: 21​×2πr=πr=722​×7=22 cm
  3. Total perimeter = base + two straight sides + curved top = 14+20+20+22=76 cm
  4. Area of rectangle: l×w=14×20=280 cm2
  5. Area of semicircle: 21​πr2=21​×722​×72=77 cm2
  6. Total area = 280+77=357 cm2

Answer: Perimeter = 76 cm; Area = 357 cm2

Quick check

The area of a rectangle is 42 cm2. If the length is tripled and the width is halved, what is the new area?

2. Hollow Containers: Internal Dimensions and Capacity

Real containers like water tanks, metal drums, and wooden crates have walls of a certain thickness (t). CSEC questions often ask you to distinguish between external dimensions, internal dimensions, and capacity.

  • Closed Box (lid on): The material takes up space on both opposite sides, so:
Internal length=External length−2t
Internal width=External width−2t
Internal height=External height−2t
  • Open Box or Open Drum (no lid): The material is at both sides of the base, but only at the bottom for height:
Internal height=External height−t
  • Capacity: The volume of the hollow space inside, which represents how much liquid or grain the container holds: Capacity=Internal Volume.
  • Volume of Material Used: The difference between outer and inner volumes:
Volume of Material=External Volume−Internal Volume

Worked example

An open concrete water trough in St. Elizabeth has external dimensions of length 150 cm, width 80 cm, and height 60 cm. The base and walls are all of uniform thickness 5 cm. Calculate:
(a) the capacity of the trough in litres (1 litre=1000 cm3),
(b) the volume of concrete used to construct the trough.

  1. Calculate internal length: 150−2(5)=140 cm
  2. Calculate internal width: 80−2(5)=70 cm
  3. Calculate internal height (open top, so subtract thickness once): 60−5=55 cm
  4. Internal volume (capacity) = 140×70×55=539000 cm3
  5. Convert capacity to litres: 539000÷1000=539 litres
  6. External volume = 150×80×60=720000 cm3
  7. Volume of concrete = External volume - Internal volume = 720000−539000=181000 cm3

Answer: Capacity = 539 litres; Volume of concrete = 181000 cm3

Quick check

A storage box with a tight-fitting lid has an external length of 40 cm. The walls and lid are made of wood of thickness 1.5 cm. What is the internal length of the box in cm?

cm

3. Density, Mass, and Manufacturing Units

In applied measurement problems, CSEC frequently links volume to density and mass:

Density=VolumeMass​⟹Mass=Density×Volume

Pay close attention to units:

  • If density is in g/cm3 and volume is in cm3, mass will be in grams (g).
  • To convert grams to kilograms: divide by 1000 (1 kg=1000 g).
  • For cross-sections with holes (such as circular washers or hollow pipes), the cross-sectional area is:
Area=Outer Area−Hole Area
  • The volume of the item is Cross-sectional Area×thickness.

Worked example

A metal washer has an outer radius of 14 mm, a circular hole of radius 7 mm at its centre, and a thickness of 3 mm. Take π=722​.
(a) Show that the volume of one washer is 1386 mm3.
(b) Given that 1 cm3=1000 mm3 and the density of the metal is 7.8 g/cm3, calculate the mass, in kilograms, of 500 washers.

  1. Cross-sectional area = πR2−πr2=π(R2−r2)
  2. Area = 722​×(142−72)=722​×(196−49)=722​×147=462 mm2
  3. Volume of 1 washer = Area×thickness=462×3=1386 mm3
  4. Total volume of 500 washers = 500×1386=693000 mm3
  5. Convert to cm3: 693000÷1000=693 cm3
  6. Mass = Density×Volume=7.8×693=5405.4 g
  7. Convert mass to kg: 5405.4÷1000=5.4054 kg

Answer: Mass = 5.41 kg (to 2 decimal places)

Quick check

A solid lead cylinder has a volume of 250 cm3. If the density of lead is 11.3 g/cm3, calculate the mass of the cylinder in kilograms.

kg

Common mistakes

  • Subtracting thickness twice from height on an open container: an open tank or drum has no top cover, so its base thickness is subtracted only once (hinternal​=hexternal​−t).
  • Adding internal shared edges to the perimeter: perimeter is solely the outer border. Do not add lines that divide the compound shape into simpler parts.
  • Incorrect unit conversions for volume and mass: remember that 1 cm3=1000 mm3 (not 10) and 1 litre=1000 cm3.

In the exam

  • Always write out the general formula (such as Density=VolumeMass​) before substituting numbers. Method marks are awarded even if an arithmetic error occurs later.
  • Follow the prompt for π: if CSEC instructs 'take π=722​', use 722​ rather than your calculator's π key to match the examiner's mark scheme.
  • Check the required units in the final line of the question (e.g., mass in kg rather than g, or volume in litres rather than cm3).

Key terms

Compound Shape
A 2D shape or 3D solid constructed from two or more standard geometric shapes.
Capacity
The internal volume of a hollow container, representing how much substance or fluid it can hold.
Density
The mass per unit volume of a substance (Mass ÷ Volume).

Practice

Easier to harder. Use paper for your working.

Practice 1

A solid steel cube has edge length 5 cm. Steel has a density of 7.8 g/cm3. Calculate the mass of the cube in grams.

g

Practice 2

A circular metal disc has a radius of 21 mm. A square hole with side length 10 mm is punched out of its centre. Using π=722​, calculate the remaining cross-sectional area of the disc in mm2.

mm²

Practice 3

An open cylindrical drum has an outer radius of 30 cm, an external height of 102 cm, and uniform wall and base thickness of 2 cm. Using π=722​, calculate the capacity of the drum in litres. (1 litre=1000 cm3)

litres

Now try real past-paper questions

3 Paper 2 questions and 2 Paper 1 multiple-choice on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q6 6(d) · 2 marksAn open cylindrical container made of metal has a circular base and uniform thickness. Its length from top to outer bottom is 120 cm and the inner and outer radii are 14 cm and 15…
  • Mathematics Q6 6(a)(iii) · 3 marksIn this question, take the value of π to be 22/7. The diagram below, not drawn to scale, shows the cross-section of a circular metal disc of radius 21 mm. A square hole with sides…
  • Mathematics Q4 4(b)(i) · 1 markComplete the statement: The internal length of the box is 30 cm – 2 × 1.5 cm =

Finished the lesson?

0 of 6 checks right on this device.

Read more

  • Mathematics for CSEC, pp. 84, 480, 588
  • CXC Study Guide - Mathematics for CSEC, p. 53
  • CSEC Maths Study Guide - Maths Crash Course, pp. 84, 86, 87
  • Collins - Concise Revision Course for CSEC Mathematics, p. 281