CSEC Mathematics · number theory and computation
Number Sequences and Rules
1. Understanding Sequences and Term-to-Term Rules
A sequence is an ordered list of numbers that follows a clear pattern or rule. Each individual number in the sequence is called a term, often labelled using the letter T.
We label terms by their position:
- T1 is the 1st term
- T2 is the 2nd term
- Tn is the nth term
A term-to-term rule tells you how to get from one term to the very next term:
- In 3,7,11,15,\dots, the rule is add 4.
- In 2,6,18,54,\dots, the rule is multiply by 3.
- In 20,15,10,5,\dots, the rule is subtract 5.
While a term-to-term rule is easy to use, finding the 50th term by adding 4 repeatedly would take far too long. For that, we need a position-to-term rule.
Worked example
A vendor at a school sports day in Grenada tracks his bottle sales at the end of every hour. The sequence of total bottles sold is:
(a) State the term-to-term rule.
(b) Write down the next two terms of the sequence.
- Find the difference between consecutive terms: 15−8=7, 22−15=7, 29−22=7. The rule is 'add 7'.
- Calculate the 5th term (T5): 29+7=36.
- Calculate the 6th term (T6): 36+7=43.
Answer: (a) Add 7; (b) 36 and 43
Quick check
Find the 6th term of the sequence: 4,11,18,25,\dots
2. Finding the General Rule (nth Term) for Linear Sequences
A linear sequence increases or decreases by the same amount each time. This constant change is called the common difference (d).
The algebraic formula connecting the term's position n (n=1,2,3,\dots) to its value is known as the **nth term rule** (Tn).
To find the nth term for a sequence with a constant difference d:
1. Multiply n by the difference d, giving the starting term dn.
2. Compare dn with your actual first term (n=1) to find what constant must be added or subtracted.
For example, in the sequence 5,8,11,14,\dots:
- Difference d=+3, so we begin with 3n.
- When n=1, 3(1)=3. But the first term is 5.
- To get from 3 to 5, we must add 2.
- Therefore, the rule is Tn=3n+2.
Worked example
A Caribbean construction team arranges square paving tiles in a pattern. The table shows the relationship between the pattern number (n) and the total perimeter (P) in metres:
| Pattern number (n) | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| Perimeter (P) | 6 | 10 | 14 | 18 |
(a) Determine an algebraic expression for P in terms of n.
(b) Use your rule to calculate the perimeter when n=25.
- Check the difference between consecutive values of P: 10−6=4, 14−10=4. The common difference is 4, so start with 4n.
- Test n=1: 4(1)=4. To reach P=6, add 2. The rule is P=4n+2.
- Verify with n=2: 4(2)+2=10, which matches the table.
- Substitute n=25 into the formula: P=4(25)+2=100+2=102.
Answer: (a) P=4n+2; (b) 102 m
Quick check
Find an expression for the nth term (Tn) of the sequence: 7,10,13,16,\dots
3. Working Backwards: Testing and Finding Term Positions
CSEC exam questions often ask whether a specific number belongs to a sequence, or which pattern number produces a given value.
To answer these questions:
1. Set the nth term formula equal to the target value.
2. Solve the equation for n.
3. Check your answer: because n represents a physical position (1st, 2nd, 3rd, \dots), **n must be a positive whole number** (n∈{1,2,3,\dots}).
If solving yields a fraction or a negative number, that value cannot be a term in the sequence.
This method also works when the rule is non-linear (such as quadratic patterns involving n2).
Worked example
The nth term of a sequence is given by Tn=3n2−2.
(a) Find the 4th term (T4).
(b) Given that Tn=145, find the value of n.
- For (a), substitute n=4: T4=3(42)−2=3(16)−2=48−2=46.
- For (b), set the formula equal to 145: 3n2−2=145.
- Add 2 to both sides: 3n2=147.
- Divide by 3: n2=49.
- Take the positive square root (since n>0): n=√49=7.
Answer: (a) 46; (b) n=7
Quick check
Which of the following numbers is a term in the sequence given by Tn=5n−3?
Common mistakes
- Confusing the position number n with the term value Tn. Remember: n is which step you are on (1, 2, 3, ...), while Tn is the actual value at that step.
- Assuming a number is in a sequence without checking if n is an integer. If n=14.5, that figure or term cannot exist.
- Applying the term-to-term rule repeatedly to find a distant term like T50. Always find the nth term formula first, then substitute n=50.
In the exam
- Always test your derived formula with at least two values of n (for example, n=1 and n=2) before using it in subsequent parts.
- When a CSEC question asks you to 'show that no figure has a perimeter of 100', set up the equation, solve for n, and explicitly state: 'Since n is not a whole number, no figure has this perimeter.'
- Show the substitution step clearly before writing the final numerical answer to secure method marks.
Key terms
- Sequence
- An ordered set of numbers that follows a definite mathematical rule.
- Term (T)
- Each individual number in a sequence.
- Term-to-term rule
- A rule stating how to calculate a term from the immediately preceding term.
- nth term (Tn)
- A general algebraic formula expressing a term's value directly in terms of its position number n.
- Common difference (d)
- The constant amount added or subtracted between successive terms in a linear sequence.
Practice
Easier to harder. Use paper for your working.
Practice 1
The nth term of a sequence is given by Tn=7n−4. Calculate the 12th term.
Practice 2
A sequence of perimeters begins: 5,9,13,17,\dots for shape numbers n=1,2,3,4,\dots. Write down an expression for the perimeter P in terms of n.
Practice 3
The nth term of a sequence is defined by Tn=4n2−7. Given that Tn=317, calculate the value of n.
Now try real past-paper questions
3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.
- Mathematics Q7 7(a)(iii) · 3 marksThe nth term, T_n, of a sequence is given by T_n = 3n² - 2. Given that T_n = 145, what is the value of n?
- Mathematics Q7 7(c) · 2 marksA table shows the pattern of numbers for figures in a sequence, relating to the number of outer lines of unit length and perimeter. Show that no figure can have a perimeter of 100…
- Mathematics Q7 7(c) · 2 marksDetermine the relationship between the number of squares, S, and the perimeter, P, of a figure.
Finished the lesson?
0 of 6 checks right on this device.
Read more
- Collins - Concise Revision Course for CSEC Mathematics, pp. 79, 80
- CXC Study Guide - Mathematics for CSEC, pp. 24, 25
- Mathematics for CSEC, p. 266