CSEC Mathematics · number theory and computation
Approximation
1. Rounding to Decimal Places and the Nearest Whole Number
In everyday life and in CSEC Mathematics, exact values are often unwieldy. We round numbers to a stated degree of accuracy depending on our needs.
Decimal places (d.p.) refer to the number of digits written to the right of the decimal point:
- 1 d.p. means one digit after the point (tenths place, e.g. 4.3).
- 2 d.p. means two digits after the point (hundredths place, e.g. 4.36).
- Nearest whole number means zero decimal places (units place, e.g. 4).
To round to n decimal places:
1. Look at the digit in the nth decimal place.
2. Look at the decision digit immediately to its right (the (n+1)th place).
3. If the decision digit is **5 or more**, add 1 to the nth digit (round up).
4. If the decision digit is **less than 5**, leave the nth digit unchanged (round down).
5. Drop all digits to the right. If the question demands 2 decimal places and the rounding ends in zero, you must keep that trailing zero (e.g. 0.090 or 4.30) to show the specified precision.
Worked example
A market vendor in St Elizabeth weighs a crate of sweet peppers as 14.863 kg. Express this mass correct to:
(a) the nearest whole kilogram
(b) 1 decimal place
(c) 2 decimal places
- For the nearest whole number (units place, digit 4), look at the first decimal place (8): since 8≥5, round up: 14+1=15.
- For 1 d.p., the first digit after the point is 8; the next digit is 6: since 6≥5, round 8 up to 9 to get 14.9.
- For 2 d.p., the second digit after the point is 6; the next digit is 3: since 3<5, keep 6 to get 14.86.
Answer: (a) 15 kg, (b) 14.9 kg, (c) 14.86 kg
Quick check
The price of diesel is calculated as \3.498$ per litre. What is this price rounded to 2 decimal places?
2. Rounding to Significant Figures
Significant figures (s.f.) reflect the reliability or precision of a measurement, counted from the most important place value.
Rules for identifying significant figures:
- First non-zero digit: The most significant figure is always the first non-zero digit reading from left to right.
- Leading zeros are never significant: In 0.0045, the zeros before the 4 are place-holders. The first significant figure is 4.
- Zeros between non-zero digits are always significant: In 308, the zero counts, so 308 has 3 s.f.
- Zeros at the end of a whole number: In 1,300, trailing zeros are place-holders unless specified otherwise.
When rounding a large whole number to a given number of significant figures, replace the remaining whole-number positions with zeros as place-holders so that the number maintains its size.
Worked example
The attendance at a regional cricket final in Barbados was 18,476. An environmental test recorded a pollutant level of 0.05063 ppm. Express:
(a) 18,476 correct to 2 significant figures
(b) 18,476 correct to 3 significant figures
(c) 0.05063 correct to 2 significant figures
- Part (a): The first two significant figures in 18,476 are 1 and 8. The next digit is 4 (4<5), so 8 remains unchanged. Fill the remaining place values with zeros: 18,000.
- Part (b): The first three significant figures are 1, 8, and 4. The next digit is 7 (7≥5), so 4 rounds up to 5: 18,500.
- Part (c): For 0.05063, leading zeros do not count. The 1st s.f. is 5, the 2nd s.f. is 0. The next digit is 6 (6≥5), so 0 rounds up to 1: 0.051.
Answer: (a) 18,000, (b) 18,500, (c) 0.051
Quick check
Write the number 3,663,900 correct to 3 significant figures.
3. Calculator Computations and Estimation
On CSEC Paper 1 and Paper 2, questions frequently combine arithmetic operations with an instruction to write the final answer to a specified degree of accuracy.
Key rules for exam questions:
- Do not round intermediate steps: Keep full calculator precision throughout your working. Round only the final result.
- Exact value vs Approximate value: If a question asks for the exact value, write the result as an exact fraction or terminating decimal (do not round). If it specifies decimal places or significant figures, approximate your final line.
- Estimation on Paper 1: Multiple-choice questions often ask for an approximate value. Round each quantity to 1 significant figure first to estimate the result mentally without tedious long division or multiplication.
Worked example
Calculate the value of 1.718.6×2.45, giving your answer correct to:
(a) 2 significant figures
(b) 2 decimal places
- Calculate the numerator: 18.6×2.45=45.57.
- Divide by the denominator: 45.57÷1.7=26.805882...
- For (a) to 2 s.f.: The first two significant figures are 2 and 6. The next digit is 8 (8≥5), so 6 rounds up to 7: 27.
- For (b) to 2 d.p.: The first two digits after the point are 8 and 0. The next digit is 5 (5≥5), so 0 rounds up to 1: 26.81.
Answer: (a) 27, (b) 26.81
Quick check
Which of the following is the best estimate for the value of 29.94×0.51?
Common mistakes
- Counting leading zeros as significant figures (e.g. writing 0.0072 to 1 s.f. as 0.0 instead of 0.007). Avoid this by always starting your count at the first non-zero digit.
- Dropping trailing zeros when rounding to a stated number of decimal places (e.g. writing 4.3 instead of 4.30 for 2 d.p.). If a specific number of decimal places is asked, write that exact number of digits after the dot.
- Forgetting place-holder zeros when rounding large numbers (e.g. writing 18,476 to 2 s.f. as 18 instead of 18,000). Without the place-holder zeros, the value changes completely from eighteen thousand to eighteen.
- Rounding too early during multi-step calculator problems. Always keep the full calculator display in memory until you state the final answer.
In the exam
- Write down your unrounded calculator display first (e.g. 26.8058...) before writing your rounded answer. This guarantees you method marks if you make a slip in the final rounding step.
- Notice the wording: 'exact value' means do not round (use improper fractions or full terminating decimals); 'to 2 d.p.' or 'to 3 s.f.' explicitly requires rounding.
- On Paper 1 multiple-choice questions, quick approximation to 1 significant figure allows you to eliminate three ridiculous distractor options in seconds.
Key terms
- decimal places
- The number of digits appearing to the right of the decimal point.
- significant figures
- The digits in a number that carry meaningful precision, counted from the first non-zero digit on the left.
- decision digit
- The digit immediately to the right of the place to which you are rounding, used to decide whether to round up or keep the digit unchanged.
- exact value
- The true numerical result without any rounding or approximation, often expressed as a fraction or surd.
Practice
Easier to harder. Use paper for your working.
Practice 1
The number 3.14063 written correct to 3 decimal places is:
Practice 2
A Trinidadian company reported an annual revenue of \284,650$. Write this value correct to 2 significant figures (enter only the number without the dollar sign).
Practice 3
Calculate the value of √52.3−2.82, giving your answer correct to 3 decimal places.
Now try real past-paper questions
3 Paper 2 questions and 3 Paper 1 multiple-choice on this topic. Quelpr marks your working point by point, like an examiner.
- CSEC Mathematics · 2022 · Paper 2 · Q1 1(a)(ii) · 1 markCalculations involving arithmetic operations and approximations. Find the value of √26.8−2.523, correct to 2 decimal places.
- CSEC Mathematics · 2021 · Paper 2 · Q1 1(c)(i)a) · 1 markIn 1965, the population of Country A was 2 714 000. In 2015, the population was 3 663 900. Write the population in 2015 correct to 3 significant figures.
- Mathematics Q1 1(b)(iii) · 1 markThis section requires writing the answer from 1(a)(ii) to specified degrees of accuracy. Write your answer in (a)(ii) correct to the nearest whole number.
Finished the lesson?
0 of 6 checks right on this device.
Read more
- Collins - Concise Revision Course for CSEC Mathematics, pp. 63, 95
- CSEC Maths Study Guide - Maths Crash Course, pp. 14, 15, 60
- Mathematics for CSEC, p. 21
- CXC Study Guide - Mathematics for CSEC, p. 12