CSEC Mathematics · statistics
Statistical Inferences
Before you start
Earlier, you learned how to construct frequency tables and calculate summary statistics like the mean, median, and mode. You also read information from bar charts, histograms, and pie charts.
Builds on: Analysis of Statistical Diagrams, Proportion and Percentage from Data, Experimental and Theoretical Probabilities
1. Population vs. Sample & Why Grouped Means are Estimates
In statistics, a population represents the entire group being studied (for example, all secondary students in Trinidad and Tobago), while a sample is a smaller subset chosen from that population to collect data. A fixed value describing the whole population is called a *parameter*, whereas a value calculated from sample data is called a *statistic*.
When continuous or large sets of raw data are collected, we often group them into class intervals to create a frequency table. When calculating the mean from grouped data:
where f is the class frequency and m is the class midpoint.
Key CSEC Insight: A frequent exam question asks: *"Why is the mean obtained from a grouped frequency table only an estimate of the true mean?"*
The answer is straightforward: we do not have access to the original, individual raw values. To carry out the calculation, we must make the assumption that every data item in a class is equal to the midpoint of that class. Because some actual values are higher than the midpoint and some are lower, the calculated result is only an estimate of the true value.
Worked example
The table below shows the weekly earnings (in EC$) of 30 market vendors in Roseau, Dominica.
| Weekly Earnings ($) | Number of Vendors (f) |
|---|---|
| 200≤w<300 | 4 |
| 300≤w<400 | 8 |
| 400≤w<500 | 12 |
| 500≤w<600 | 6 |
(a) Calculate an estimate of the mean weekly earnings.
(b) Explain why your answer to (a) is only an estimate.
- Step 1: Find the midpoint (m) of each class interval: 2200+300=250, 2300+400=350, 2400+500=450, 2500+600=550.
- Step 2: Multiply each midpoint by its frequency (f×m): (4×250=1000), (8×350=2800), (12×450=5400), (6×550=3300).
- Step 3: Sum the products: ∑fm=1000+2800+5400+3300=12500.
- Step 4: Sum the frequencies: ∑f=4+8+12+6=30.
- Step 5: Divide to find the estimated mean: 3012500=416.67.
- Step 6: Address part (b): The exact individual earnings of each vendor are unknown because the data has been grouped into intervals, so we assumed each vendor earned the midpoint value of their class.
Answer: (a) Estimated mean = EC$416.67 (to 2 d.p.). (b) It is only an estimate because the raw individual earnings are unknown; each vendor is assumed to earn the midpoint value of their class interval.
Quick check
A researcher groups the exam marks of 100 students into classes of width 10 and calculates the mean using class midpoints. Why is this result an estimate?
2. Describing Trends and Making Comparisons Over Time
A chronological chart (or time-series graph) shows how a quantity behaves over days, months, or years. In CSEC questions, you are frequently asked to describe a trend or comment on a specific period compared to previous periods.
When writing these answers:
- Look at the overall direction: Is there an upward (increasing) trend, a downward (decreasing) trend, or is it fluctuating?
- Quote specific values: Mention numerical values or differences to support your observation.
- Note sudden changes: State whether a particular month or year is unusually high or low compared to the average of preceding periods.
Worked example
The bar chart shows the monthly sales of coconut water from a roadside vendor in Barbados between January and June. Comment on how the sales in June compare with the sales in the previous five months.
- Step 1: Identify sales figures for January to May: 120, 135, 150, 140, and 165.
- Step 2: Calculate the average for those five months: 5120+135+150+140+165=5710=142.
- Step 3: Read the sales in June: 260.
- Step 4: Formulate a clear, two-part comment: (1) State that June sales rose sharply / were much higher than any single previous month; (2) Compare the value to the previous months' range (120–165) or their average (142).
Answer: Sales in June (260) were substantially higher than in any of the previous five months, exceeding the May peak of 165 by 95 and nearly doubling the average sales (142) of January to May.
Quick check
The bar chart displays rainfall in Trinidad from July to December:
- Jul: 220 mm
- Aug: 240 mm
- Sep: 210 mm
- Oct: 260 mm
- Nov: 280 mm
- Dec: 150 mm
Which statement best describes the rainfall in December compared to the previous five months?
3. Drawing Inferences from Thresholds and Frequency Tables
Statistical tables often require you to determine the number or percentage of items that satisfy a specific condition, such as scoring "at least", "more than", or "50 metres or more".
To answer these questions correctly:
- Identify the relevant class intervals: Locate which intervals contain the values specified by the boundary condition.
- Sum the matching frequencies: Add together the frequencies of all classes meeting the criterion.
- Calculate proportions or percentages if asked: Divide by the total sample size n and multiply by 100%:
- Draw contextual conclusions: Use the result to answer real-world questions (e.g., whether a production line meets quality standards or if athletes qualify for a team).
Worked example
During an inter-house athletics trial, the distances (d in metres) thrown by 50 students in a javelin throw event were recorded:
| Distance (d metres) | Number of Students (f) |
|---|---|
| 20≤d<30 | 5 |
| 30≤d<40 | 12 |
| 40≤d<50 | 18 |
| 50≤d<60 | 11 |
| 60≤d<70 | 4 |
(a) Determine the number of students who threw the javelin a distance recorded as 50 metres or more.
(b) Students throwing 50 metres or more qualify for the national squad. What percentage of the students qualified?
- Step 1: Identify which class intervals represent distances of 50 metres or more: 50≤d<60 and 60≤d<70.
- Step 2: Add the frequencies of these two intervals: 11+4=15.
- Step 3: To find the percentage, divide this count by the total number of students (50) and multiply by 100%: 5015×100%=30%.
Answer: (a) 15 students threw 50 metres or more. (b) 30% of the students qualified for the squad.
Quick check
The table shows the waiting times (t in minutes) of 60 patients at an outpatient clinic in Kingston:
| Waiting Time (t min) | Frequency |
|---|---|
| 0≤t<15 | 8 |
| 15≤t<30 | 15 |
| 30≤t<45 | 22 |
| 45≤t<60 | 11 |
| 60≤t<75 | 4 |
Determine the number of patients who waited 45 minutes or more.
Common mistakes
- Saying a grouped mean is an estimate because 'people made errors' or 'the sample was too small'. The true reason is that the grouping process conceals the individual raw scores, forcing us to use class midpoints.
- Ignoring the words 'or more' or 'at least' and only reading the frequency of a single class interval rather than summing all relevant classes.
- Writing vague comments like 'sales changed' instead of identifying the direction ('sales increased sharply') and supporting it with numbers from the chart.
In the exam
- When asked to comment on data or compare two periods, CSEC examiners award 1 mark for the observation (e.g. increase/decrease) and 1 mark for supporting it with evidence (quoting values or calculating the difference).
- Check whether intervals use '<' or '≤' at the boundaries to make sure you place boundary values in the correct class.
Key terms
- Population
- The entire group of individuals or items that you wish to study.
- Sample
- A subset of the population selected to gather data and draw inferences.
- Statistical Inference
- Drawing general conclusions or making predictions about a population based on sample data.
- Midpoint Assumption
- The assumption that all values within a grouped frequency class interval are equal to the class midpoint.
Practice
Easier to harder. Use paper for your working.
Practice 1
A pie chart represents the favourite sports of 120 students in Castries, St. Lucia. The sector angle for Cricket is 150∘. Determine the number of students whose favourite sport is Cricket.
Practice 2
A teacher calculates an estimated mean score of 64 from a grouped frequency table of test scores. In your own words, explain why this value is called an 'estimate' rather than the 'exact' mean.
Practice 3
The table shows the marks obtained by 50 students in a mock CSEC Mathematics examination:
| Mark Range (x) | Number of Students |
|---|---|
| 21−30 | 3 |
| 31−40 | 7 |
| 41−50 | 15 |
| 51−60 | 14 |
| 61−70 | 8 |
| 71−80 | 3 |
Students who scored 51 marks or more were recommended for advanced revision. Calculate the percentage of students who received this recommendation.
Now try real past-paper questions
3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.
- Mathematics Q7 7(c) · 1 markExplain why the value of the mean obtained in (b)(ii) is only an estimate of the true value.
- Mathematics Q6 6(v) · 2 marksComment on how the sales in June compared with the sales in the previous five months.
- Mathematics Q7 7(d)(i) · 1 markDetermine the number of students who threw the ball a distance recorded as 50 metres or more
Finished the lesson?
0 of 6 checks right on this device.
Read more
- introductory-statistics-2e_-_WEB, pp. 18, 417
- CSEC Maths Study Guide - Maths Crash Course, p. 121
- Collins - Concise Revision Course for CSEC Mathematics, p. 423
- Mathematics for CSEC, pp. 205, 613
- CXC Study Guide - Mathematics for CSEC, p. 69