Quelpr

CSEC Mathematics · statistics

Statistical Diagrams

Construct and interpret pie charts, bar charts, histograms, and frequency polygons from raw and grouped data.
16 min Syllabus: construct statistical diagrams including pie charts, bar charts, line graphs, histograms, and frequency polygons

Before you start

A frequency table lists data values or intervals alongside how often each occurs. To draw charts accurately, you must know how to find totals, identify class boundaries, and calculate midpoints.

Builds on: Frequency Tables

1. Pie Charts and Bar Charts

A bar chart uses rectangular bars of equal width to represent discrete or categorical data. Spaces are left between the bars to show that categories are distinct, and the height of each bar equals the category's frequency.

A pie chart uses a full circle (360∘) divided into sectors (slices) to show the proportion of each category relative to the whole.

To calculate the sector angle for any category:

Sector Angle=Total FrequencyFrequency of Category​×360∘

When CSEC asks you to construct a pie chart with a given radius (such as 4 cm), draw the circle with a compass, draw a starting radius, and use a protractor to measure each sector angle carefully from the centre.

Worked example

A group of 60 students in Barbados were surveyed about their favourite local fruit. The results were: Mango (18), Guava (12), Papaya (15), and Banana (15).

Calculate the sector angles and construct a pie chart to represent this data.

Pie chart showing favourite fruits of 60 students: Mango 108°, Guava 72°, Papaya 90°, and Banana 90°108°72°90°90°Mango (18)Guava (12)Papaya (15)Banana (15)
  1. Find total frequency: 18+12+15+15=60.
  2. Mango sector angle: 6018​×360∘=0.30×360∘=108∘.
  3. Guava sector angle: 6012​×360∘=0.20×360∘=72∘.
  4. Papaya sector angle: 6015​×360∘=0.25×360∘=90∘.
  5. Banana sector angle: 6015​×360∘=0.25×360∘=90∘.
  6. Check that angles sum to 360∘: 108∘+72∘+90∘+90∘=360∘.

Answer: Mango: 108∘, Guava: 72∘, Papaya: 90∘, Banana: 90∘.

Quick check

In a survey of 40 students, 14 walk to school. What is the angle of the sector representing students who walk on a pie chart?

°

2. Histograms

A histogram represents continuous or grouped data. Unlike a bar chart, the bars in a histogram touch each other with no gaps between them because the scale along the horizontal axis is continuous.

Key rules for histograms at CSEC:

  • **Horizontal axis (x-axis): Plot class boundaries**, not class limits. If intervals are 1−10,11−20, the boundaries are 0.5,10.5,20.5.
  • **Vertical axis (y-axis): Plot frequency** when class widths are equal.
  • Follow the specified scale strictly (e.g., "2 cm to represent 5 units").

Estimating the Mode from a Histogram:
1. Locate the tallest bar (the modal class).
2. Draw a diagonal line from the top-left corner of the modal bar to the top-left corner of the adjacent bar on the right.
3. Draw another diagonal line from the top-right corner of the modal bar to the top-right corner of the adjacent bar on the left.
4. From the intersection point of these two diagonals, drop a vertical line down to the horizontal axis. The value on the axis is the estimated mode.

Worked example

The table shows the distances (d km) that 30 students travel to school:

Distance (km)Frequency
1−54
6−1010
11−1512
16−204

State the class boundaries and draw a histogram to represent the data.

Histogram showing travel distances of 30 students with touching bars over class boundaries 0.5-5.5, 5.5-10.5, 10.5-15.5, and 15.5-20.50246810120.55.510.515.520.5Distance (km)Frequency
  1. Determine the class boundaries: subtract 0.5 from each lower limit and add 0.5 to each upper limit.
  2. Class boundaries are 0.5−5.5, 5.5−10.5, 10.5−15.5, and 15.5−20.5.
  3. Mark boundaries 0.5,5.5,10.5,15.5,20.5 along the horizontal axis.
  4. Draw touching bars with heights matching frequencies: 4 for 0.5−5.5, 10 for 5.5−10.5, 12 for 10.5−15.5, and 4 for 15.5−20.5.

Answer: Boundaries are 0.5−5.5,5.5−10.5,10.5−15.5,15.5−20.5. Heights are 4,10,12,4 respectively.

Quick check

For the class interval 21−30 in a frequency table of integer test scores, what are the lower and upper class boundaries?

3. Frequency Polygons and Line Graphs

A frequency polygon is a line graph used to display the shape of a continuous or grouped frequency distribution.

Steps to construct a frequency polygon:
1. Calculate the midpoint (class mark) of each interval:

Midpoint=2Lower Limit+Upper Limit​

2. Plot each point with coordinates (Midpoint,Frequency).
3. Connect adjacent points using straight line segments drawn with a ruler (do not draw a smooth curve).
4. Anchor the polygon: Extend the polygon down to the horizontal axis (frequency =0) at the midpoints of the imaginary intervals directly before the first interval and directly after the last interval.

A frequency polygon can also be constructed by joining the midpoints of the top edges of the bars of a histogram.

Worked example

The marks of 30 students in a test are grouped as follows:

MarksMidpoint (x)Frequency (f)
11−2015.53
21−3025.57
31−4035.512
41−5045.58

Determine the anchor points and state all coordinates needed to draw the frequency polygon.

Frequency polygon plotted with midpoints and frequencies, anchored at 5.5 and 55.5 on the x-axis1020304050606120MarksFrequency
  1. Class width is 10. Midpoints of the data classes are 15.5,25.5,35.5,45.5.
  2. Find the lower anchor midpoint: subtract class width (10) from first midpoint: 15.5−10=5.5. Point: (5.5,0).
  3. Find the upper anchor midpoint: add class width (10) to last midpoint: 45.5+10=55.5. Point: (55.5,0).
  4. Plot the data points: (15.5,3),(25.5,7),(35.5,12),(45.5,8).
  5. Connect all points in order with straight lines.

Answer: Coordinates to plot: (5.5,0),(15.5,3),(25.5,7),(35.5,12),(45.5,8),(55.5,0).

Quick check

What is the midpoint of the class interval 40−59?

Common mistakes

  • Leaving gaps between bars on a histogram: histograms represent continuous data, so adjacent bars must touch along the class boundaries.
  • Plotting class limits instead of class boundaries on the horizontal axis of a histogram.
  • Plotting frequency polygons at the class boundaries or limits instead of at the class midpoints.
  • Forgetting to tie down (anchor) the frequency polygon to the x-axis at frequency 0 on both ends.

In the exam

  • Always check the scale specified in the question (e.g. '2 cm to represent 5 units'). CSEC examiners deduct marks if you choose your own scale.
  • When drawing a pie chart, always label every sector with its category name or percentage/angle, and ensure your sector angles sum to exactly 360°.
  • Use a sharp pencil and a ruler for straight lines. A freehand polygon or poorly drawn circle loses easy accuracy marks.

Key terms

Sector Angle
The angle at the centre of a circle representing a category in a pie chart, calculated as (frequency / total) × 360°.
Class Boundaries
The true continuous limits separating class intervals, plotted on the horizontal axis of a histogram.
Class Midpoint
The central value of a class interval, found by (lower limit + upper limit) / 2, used as the x-coordinate for frequency polygons.
Frequency Polygon
A line graph connecting the midpoints of class intervals at heights equal to class frequencies, closed at both ends on the x-axis.

Practice

Easier to harder. Use paper for your working.

Practice 1

A pie chart represents the grades obtained by 120 students. If the sector angle for Grade I is 54°, how many students obtained Grade I?

students

Practice 2

Which pair of coordinates correctly represents the point to plot for the class interval 10−18 with a frequency of 7 on a frequency polygon?

Practice 3

Explain step-by-step how to estimate the mode of a continuous distribution from a completed histogram.

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q6 6(b) · 5 marksUsing a scale of 2 cm to represent 5 km on the horizontal axis and a scale of 1 cm to represent 1 student on the vertical axis, draw a histogram to represent the data.
  • Mathematics Q7 7(c) · 5 marksUsing a scale of 1 cm on the x-axis to represent 5 metres, and a scale of 1 cm on the y-axis to represent 1 student, draw a histogram to illustrate the data.
  • Mathematics Q3 3(b)(ii) · 4 marksThe data above are to be represented on a pie chart. Using a circle of radius 4 cm, construct the pie chart to represent the data.

Finished the lesson?

0 of 6 checks right on this device.

Read more

  • Collins - Concise Revision Course for CSEC Mathematics, pp. 386, 563
  • CSEC Maths Study Guide (Revised 2016), pp. 49, 53
  • CXC Mathematics CSEC Notes Study Guide, p. 49
  • CSEC Maths Study Guide - Maths Crash Course, p. 107
  • Mathematics for CSEC, pp. 512, 513
  • CXC Study Guide - Mathematics for CSEC, p. 186