Quelpr

CSEC Mathematics · vectors and matrices

Matrix Representation of Transformations

Determine and use 2×2 matrices to perform reflections, rotations, and enlargements on points and shapes in the Cartesian plane.
15 min Syllabus: determine 2x2 transformation matrices associated with reflections, rotations, and enlargements

1. Transforming Points Using 2×2 Matrices

In coordinate geometry, we can represent any point (x,y) as a 2×1 column vector (xy​), called its position vector.

A 2×2 matrix M=(ac​bd​) transforms this point into an image point (x′,y′) by matrix multiplication:

(ac​bd​)(xy​)=(ax+bycx+dy​)=(x′y′​)

If you need to transform an entire polygon (such as a triangle), you can place the coordinates of all its vertices side-by-side into a single matrix. Multiplying M by this vertex matrix gives all image points at once.

When CSEC gives you an object point and its image point, you can set up linear equations from the matrix multiplication to find unknown entries inside the transformation matrix.

Worked example

The matrix T=(c0​0d​) maps the point P(2,3) onto the image point Q(2,−3). Determine the values of c and d, and state the single transformation represented by T.

  1. Write the transformation as a matrix equation: (c0​0d​)(23​)=(2−3​)
  2. Multiply row by column on the left-hand side: (2c+00+3d​)=(2c3d​)
  3. Equate corresponding entries: 2c=2⟹c=1, and 3d=−3⟹d=−1
  4. Substitute c and d back into T: T=(10​0−1​)
  5. Notice that the x-coordinate stays unchanged while the y-coordinate changes sign; this is a reflection in the x-axis.

Answer: c=1, d=−1; T represents a reflection in the x-axis.

Quick check

The matrix M=(30​02​) maps the point A(4,−5) to A′(x′,y′). Calculate the value of the image y-coordinate, y′.

2. Matrices for Reflections

You do not need to memorise transformation matrices blindly. You can find any transformation matrix by tracking what happens to the two base unit vectors:

  • I=(10​) (a point one unit along the positive x-axis)
  • J=(01​) (a point one unit along the positive y-axis)

The image of (10​) forms the first column of the matrix, and the image of (01​) forms the second column.

Here are the four standard reflections required for CSEC:

Reflection LineEffect on (x,y)Image of (10​)Image of (01​)Matrix
**x-axis** (y=0)(x,−y)(10​)(0−1​)(10​0−1​)
**y-axis** (x=0)(−x,y)(−10​)(01​)(−10​01​)
**Line y=x**(y,x)(01​)(10​)(01​10​)
**Line y=−x**(−y,−x)(0−1​)(−10​)(0−1​−10​)

Worked example

Triangle ABC has vertices A(1,2), B(3,2), and C(1,4). It is reflected in the line y=x to form triangle A′B′C′. Using matrices, determine the coordinates of A′, B′, and C′.

Triangle ABC with vertices at (1, 2), (3, 2), and (1, 4) reflected across the line y = x to form image triangle A'B'C' with vertices at (2, 1), (2, 3), and (4, 1).-112345-1123450xyABCA'B'C'TT'y = x
  1. Write the matrix for reflection in the line y=x: M=(01​10​)
  2. Set up the vertex matrix for ABC with each column as a vertex: (12​32​14​)
  3. Multiply M by the vertex matrix: (01​10​)(12​32​14​)=((0)(1)+(1)(2)(1)(1)+(0)(2)​(0)(3)+(1)(2)(1)(3)+(0)(2)​(0)(1)+(1)(4)(1)(1)+(0)(4)​)
  4. Simplify the resulting matrix: (21​23​41​)
  5. Read off the coordinates of each column: A′(2,1), B′(2,3), and C′(4,1).

Answer: A′(2,1), B′(2,3), and C′(4,1)

Quick check

Which 2×2 matrix represents a reflection in the y-axis?

3. Matrices for Rotations About the Origin

When a shape is rotated about the origin (0,0), we can once again track where the base vectors (10​) and (01​) land:

  • **90∘ anticlockwise rotation** (same as 270∘ clockwise):

(10​)→(01​) and (01​)→(−10​)
Matrix: R90∘ anti​=(01​−10​)

  • **90∘ clockwise rotation** (same as 270∘ anticlockwise):

(10​)→(0−1​) and (01​)→(10​)
Matrix: R90∘ clock​=(0−1​10​)

  • **180∘ rotation** (clockwise or anticlockwise):

(10​)→(−10​) and (01​)→(0−1​)
Matrix: R180∘​=(−10​0−1​)

*Note on CSEC questions:* Pay close attention to whether the rotation specifies clockwise or anticlockwise.

Worked example

The point P(3,5) is rotated 90∘ clockwise about the origin (0,0). Determine the matrix for this rotation and find the coordinates of the image point P′.

  1. Recall the matrix for a 90∘ clockwise rotation about the origin: R=(0−1​10​)
  2. Express point P as a column vector: (35​)
  3. Multiply R by the column vector: (0−1​10​)(35​)=((0)(3)+(1)(5)(−1)(3)+(0)(5)​)
  4. Calculate the entries: (5−3​)
  5. State the image coordinates: P′(5,−3).

Answer: The matrix is (0−1​10​) and P′(5,−3).

Quick check

Point K(−2,6) undergoes a rotation of 180∘ about the origin. Write down the 2×2 matrix for this transformation and state the coordinates of the image K′.

4. Enlargements and Combined Transformations

An enlargement with centre (0,0) and scale factor k multiplies every coordinate by k. Its matrix is:

E=(k0​0k​)

If k=3, the matrix is (30​03​). If k=−2, it is (−20​0−2​).

### Combined Transformations
When transformation A is performed first, followed by transformation B second, the single combined matrix that does both at once is:

Combined Matrix=BA

Warning: The order of multiplication is the reverse of the order in words! A acts on the point x first to give Ax, and then B acts on that result: B(Ax)=(BA)x.

*Important syllabus fact:* A translation cannot be represented by a 2×2 matrix because it adds a displacement vector (x′y′​)=(xy​)+(ab​) rather than multiplying coordinates.

Worked example

Triangle ABC is transformed into triangle LMN by a reflection in the x-axis, followed by a reflection in the y-axis.
(a) Write down the 2×2 matrix for each reflection.
(b) Determine the single 2×2 matrix representing the combined transformation.
(c) Fully describe the single geometric transformation represented by this combined matrix.

  1. Let M1​ be reflection in the x-axis: M1​=(10​0−1​)
  2. Let M2​ be reflection in the y-axis: M2​=(−10​01​)
  3. Since M1​ is followed by M2​, multiply in reverse order: M=M2​M1​
  4. Calculate the product: M=(−10​01​)(10​0−1​)=((−1)(1)+(0)(0)(0)(1)+(1)(0)​(−1)(0)+(0)(−1)(0)(0)+(1)(−1)​)=(−10​0−1​)
  5. Identify the matrix: (−10​0−1​) maps (x,y)→(−x,−y), which is a rotation of 180∘ about the origin.

Answer: (a) M1​=(10​0−1​), M2​=(−10​01​); (b) (−10​0−1​); (c) Rotation of 180∘ about the origin (0,0).

Quick check

Transformation P is followed by transformation Q. Which matrix calculation gives the single combined transformation?

Common mistakes

  • Reversing the multiplication order in combined transformations: writing AB when transformation A is followed by transformation B. Remember that B acts second, so the single matrix must be BA.
  • Mixing up clockwise and anticlockwise 90∘ rotation matrices. Use the unit vector (10​): turning clockwise lands at (0,−1), giving first column (0−1​); turning anticlockwise lands at (0,1), giving first column (01​).
  • Believing translations can be represented by a 2×2 matrix. A 2×2 matrix always maps (0,0) to (0,0), so it cannot slide points without leaving the origin fixed.

In the exam

  • Always state the centre of rotation or centre of enlargement when describing a transformation; write 'about the origin (0,0)', not just 'rotation'.
  • Write out the matrix product step by step: examiners award method marks for the correct row-by-column multiplication layout even if an arithmetic slip occurs.
  • When working backwards from an image (x′,y′) to find the pre-image (x,y), set up the matrix equation and solve the two linear equations.

Key terms

Position Vector
A column vector (xy​) representing the coordinates of a point relative to the origin.
Transformation Matrix
A 2×2 matrix that maps every point (x,y) to an image point (x′,y′) through matrix multiplication.
Combined Transformation
The single transformation produced by carrying out two or more transformations in sequence, found by multiplying their matrices in reverse order.
Enlargement Matrix
A diagonal matrix of the form (k0​0k​), where k is the scale factor with centre at the origin.

Practice

Easier to harder. Use paper for your working.

Practice 1

The matrix J=(−10​01​) represents a reflection in the y-axis. The image of the point P(x,y) under J is (5,4). Determine the x-coordinate of P.

Practice 2

Which matrix represents an enlargement of scale factor 4 with centre (0,0) followed by a reflection in the x-axis?

Practice 3

Triangle T is mapped onto T′ by a rotation of 90∘ anticlockwise about the origin (0,0), and T′ is then mapped onto T′′ by an enlargement with centre (0,0) and scale factor 2.
(a) Write down the matrix for the rotation and the matrix for the enlargement.
(b) Determine the single 2×2 matrix that maps T directly onto T′′.

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q3 3(b)(iii) · 1 markTriangle ABC with vertices A(1, 1), B(1, 4) and C(3, 1) is shown on a diagram. Triangle ABC is mapped onto triangle LMN by a reflection in the x-axis followed by a reflection in…
  • Mathematics Q11 11(a)(i) · 2 marksThe matrix T = [[c, 0], [0, d]] maps the point P(2, 3) onto the point Q(2, -3). Determine the values of c and d.
  • Mathematics Q11 11(b) · 3 marksThe matrix J = [[-1, 0], [0, 1]] represents a single transformation. The image of the point P under transformation J is (5, 4). Determine the coordinates of P.

Finished the lesson?

0 of 7 checks right on this device.

Read more

  • Mathematics for CSEC, pp. 446, 451
  • CSEC Mathematics Study Guide - The Student Hub - CSEC Mathematics Formula Booklet Kerwin Springer, p. 12
  • CSEC Maths Study Guide (Revised 2016), p. 86
  • CXC Mathematics CSEC Notes Study Guide, p. 86
  • CSEC Maths Study Guide - Maths Crash Course, pp. 288, 289
  • Collins - Concise Revision Course for CSEC Mathematics, p. 500