Quelpr

CSEC Mathematics · relations, functions and graphs

Interpreting Function Graphs

Interpret distance-time, speed-time, and other practical functional graphs to calculate speeds, acceleration, distances, and rates of change.
15 min Syllabus: interpret distance-time and speed-time graphs and other functional graphs

Before you start

You already know how to plot linear and non-linear functions, find the gradient of a straight line using m=x2​−x1​y2​−y1​​, and calculate the area of basic shapes like rectangles, triangles, and trapeziums.

Builds on: Drawing Straight-Line Graphs, Graphs of Quadratic Functions, Graphs of Non-Linear Functions

1. Distance-Time Graphs

A distance-time graph shows how far an object has travelled from a starting point over time. Distance is plotted on the vertical (y) axis and time on the horizontal (x) axis.

Key features to remember:

  • Gradient represents speed: Because gradient=change in xchange in y​=change in timechange in distance​, the gradient is the speed (or velocity in a given direction).
  • Steeper line: A steeper slope means a faster speed.
  • Horizontal flat line: The distance is not changing, which means the object is stationary (at rest), so speed=0.
  • Straight line segment: The gradient is constant, meaning the object is moving at a steady, constant speed.
  • Curved line: The speed is changing continuously. A chord between two points gives the average speed, while the gradient of a tangent drawn at a specific point gives the instantaneous speed.
Distance-time graph showing a journey with three stages: moving forward, resting, and continuing forward.204060802004006008000Time (s)Distance (m)OABC

Worked example

The graph shows the journey of a maxi-taxi along the Eastern Main Road. (a) Determine the speed of the maxi-taxi during the first 20 seconds. (b) State how long the maxi-taxi stopped to pick up passengers. (c) Calculate the average speed for the entire 80-second journey.

Distance-time graph showing a maxi-taxi travelling 300 m in 20 s, stopping until 50 s, and continuing to 900 m at 80 s.2040608020040060080010000Time (s)Distance (m)
  1. Speed for the first 20 s is the gradient of segment OA: Speed=20−0300−0​=15 m s−1.
  2. The maxi-taxi is stationary where the line is flat (AB), from t=20 s to t=50 s. Stop duration =50−20=30 seconds.
  3. Total distance travelled =900 m; total time taken =80 s.
  4. Average speed =Total TimeTotal Distance​=80900​=11.25 m s−1.

Answer: (a) 15 m s−1, (b) 30 seconds, (c) 11.25 m s−1

Quick check

A cyclist travels 480 m in 40 seconds at a constant speed. What is the gradient of the line on a distance-time graph representing this motion?

m s⁻¹

2. Speed-Time Graphs: Gradient and Acceleration

On a speed-time (or velocity-time) graph, speed is on the vertical axis and time is on the horizontal axis.

  • Gradient represents acceleration:
Acceleration (a)=time takenchange in speed​=tv−u​

where u is initial speed and v is final speed. Acceleration is typically measured in m s−2 (metres per second squared) or km h−2.

  • Positive slope (upward): The object is speeding up (accelerating).
  • Horizontal line: Speed is unchanged, so acceleration is 0 m s−2 (constant speed).
  • Negative slope (downward): The object is slowing down (deceleration or retardation). If you state acceleration, it has a negative sign; if you state deceleration, you give a positive value.
Speed-time graph showing uniform acceleration, constant speed, and uniform deceleration.510152025305101520250Time (s)Speed (m s⁻¹)(8, 20)(20, 20)(28, 0)

Worked example

A car accelerates from rest to 20 m s−1 in 8 seconds, cruises at this speed for 12 seconds, and then brakes uniformly to a complete stop at t=28 seconds. Calculate: (a) the acceleration during the first 8 seconds, (b) the deceleration during braking.

  1. For the first 8 seconds, initial speed u=0, final speed v=20 m s−1.
  2. Acceleration =tv−u​=820−0​=2.5 m s−2.
  3. During braking (from t=20 s to t=28 s), time taken =28−20=8 s.
  4. The speed drops from 20 m s−1 to 0 m s−1.
  5. Rate of deceleration =820−0​=2.5 m s−2 (or an acceleration of −2.5 m s−2).

Answer: (a) 2.5 m s−2, (b) 2.5 m s−2

Quick check

A car travelling at 24 m s−1 begins to slow down with a uniform deceleration of 3 m s−2. How many seconds will it take to come to rest?

s

3. Speed-Time Graphs: Distance as Area Under the Graph

The single most important property of a speed-time graph in CSEC examinations is:

Total Distance Travelled=Area Under the Graph

To find this area, split the region beneath the line into familiar geometric shapes:

  • Right-angled triangle: Area=21​×base×height
  • Rectangle: Area=length×width
  • Trapezium: Area=21​(a+b)h, where a and b are the parallel sides (durations) and h is the vertical height (maximum speed).

Using the trapezium formula directly often saves time and reduces arithmetic errors.

Speed-time graph showing a trapezoidal region under the curve between t = 0 and t = 24 seconds with maximum speed 15 m/s.510152025612180Time (s)Speed (m s⁻¹)(6, 15)(18, 15)

Worked example

The graph illustrates a sprint cyclist's ride. The cyclist accelerates from rest to 15 m s−1 in 6 s, maintains this speed until t=18 s, and stops at t=24 s. (a) Calculate the total distance covered. (b) Calculate the average speed for the whole ride.

  1. The shape under the graph is a trapezium with height h=15 m s−1.
  2. The longer parallel base is the total time: b=24 s.
  3. The shorter parallel top is the constant speed interval: a=18−6=12 s.
  4. Total distance =Area=21​(a+b)h=21​(12+24)×15=21​(36)×15=18×15=270 m.
  5. Average speed =Total TimeTotal Distance​=24270​=11.25 m s−1.

Answer: (a) 270 m, (b) 11.25 m s−1

Quick check

A train accelerates from rest to 30 m s−1 in 10 seconds and immediately brakes to rest in another 20 seconds. Calculate the total distance travelled in metres.

m

4. Reading Other Functional and Practical Graphs

CSEC exams frequently test your ability to read information directly from graphs representing practical situations, such as conversion curves, reservoir volumes, or quadratic trajectory paths.

  • Reading coordinates: Always read the scale of both axes carefully. Count how many small grid squares correspond to 1 or 10 units.
  • **Finding y given x:** Draw a vertical line from the value on the x-axis to the curve, then go horizontally to the y-axis.
  • **Finding x given y:** Draw a horizontal line from the y-axis across to the curve, then go down to the x-axis. If the graph is a curve (such as a parabola), there may be more than one value of x.
  • Estimating values: Show dotted guideline tracks on your exam paper. Examiners award method marks for visible reading lines.
Functional graph showing fuel volume remaining in litres against distance travelled in kilometres.2040608010010203040500Distance travelled (km)Fuel in tank (litres)(0, 50)(100, 30)

Worked example

The graph shows the amount of fuel F (in litres) remaining in a truck's tank as it travels a distance d (in km). (a) State the initial amount of fuel in the tank. (b) Find the rate at which fuel is consumed per kilometre. (c) Determine how much fuel remains after travelling 60 km.

Graph of fuel remaining against distance travelled, showing fuel decreasing linearly from 50 litres at 0 km to 0 litres at 250 km.601201802401020304050600Distance (km)Fuel (litres)
  1. The initial fuel is the vertical intercept at d=0: 50 litres.
  2. Rate of fuel consumption is the gradient: m=100−030−50​=100−20​=−0.2 litres per km. The truck consumes 0.2 litres for each kilometre travelled.
  3. The equation of the line is F=50−0.2d.
  4. When d=60: F=50−0.2(60)=50−12=38 litres.

Answer: (a) 50 litres, (b) 0.2 litres per km, (c) 38 litres

Quick check

If a curve of y=f(x) shows water height against time, what does the gradient of a tangent drawn at t=4 hours represent?

Common mistakes

  • Confusing distance-time graphs with speed-time graphs. On a distance-time graph, a flat line means stopped (stationary); on a speed-time graph, a flat line means moving at a constant, non-zero speed.
  • Forgetting to check units before calculating. If time is given in minutes while speed is in km h−1 or m s−1, you must convert minutes to hours or seconds first.
  • Calculating the area under a distance-time graph. Area under the curve only gives distance on a speed-time (or velocity-time) graph; finding area under a distance-time graph has no useful physical meaning in CSEC.

In the exam

  • Always draw dotted construction lines on your graph when asked to 'Use your graph to estimate...' to guarantee method marks.
  • When asked for deceleration, do not write a negative number (e.g., write 'deceleration is 2.5 m s−2', not '−2.5 m s−2').
  • State correct units in every final answer (e.g., m, m s−1, or m s−2). Marks are often deducted for missing or incorrect units.

Key terms

Gradient
The steepness of a line or curve, calculated as change in vertical value divided by change in horizontal value.
Acceleration
The rate of increase of speed or velocity over time, represented by the gradient on a speed-time graph.
Deceleration
The rate of decrease of speed or velocity as an object slows down (also known as retardation).
Average Speed
Total distance travelled divided by the total time taken for the whole journey.

Practice

Easier to harder. Use paper for your working.

Practice 1

A distance-time graph shows a runner moving from distance 0 m to 180 m in 30 seconds at a constant rate. What is the runner's speed?

m s⁻¹

Practice 2

A car accelerates from 10 m s−1 to 28 m s−1 in 6 seconds on an open stretch of the highway. What is its rate of acceleration?

m s⁻²

Practice 3

A bus starts from rest, accelerates uniformly to 20 m s−1 in 10 s, maintains 20 m s−1 for 30 s, and then comes to a stop in 10 s. Calculate the total distance travelled by the bus in metres.

m

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q8 8(b)(iii) · 1 markThe speed-time graph below shows information on the first 60 seconds of a car's journey. At time t = 60 seconds, the car starts to slow down with a uniform deceleration of 2.5…
  • Mathematics Q10 10(b)(i)b) · 2 marksThe shaded area in the diagram below shows the solution of a set of inequalities in x and y. The variable x represents the number of boys in a cricket club and y represents the…
  • Mathematics Q10 10(c)(ii) · 2 marksUse your graph to estimate the value of x when y = 3.5.

Finished the lesson?

0 of 7 checks right on this device.

Read more

  • Mathematics for CSEC, pp. 130, 316, 336, 342, 631
  • Collins - Concise Revision Course for CSEC Mathematics, pp. 377, 572
  • CSEC Maths Study Guide (Revised 2016), pp. 46, 48
  • CXC Mathematics CSEC Notes Study Guide, p. 46