CSEC Mathematics · geometry and trigonometry
Constructing Lines, Angles, and Polygons
Before you start
Earlier, you practised measuring lengths with a ruler and measuring angles with a protractor. In this topic, we leave the protractor behind and use only a straight edge (ruler) and a pair of compasses to build exact geometric figures.
1. Bisecting Lines and Angles
To bisect means to cut exactly in half. In CSEC exams, two fundamental constructions appear repeatedly:
1. Perpendicular bisector of a line segment:
- Open your compasses to more than half the length of line segment AB.
- Place the compass point at A and draw arcs above and below the line.
- Keeping the exact same compass width, place the point at B and draw intersecting arcs above and below the line.
- Draw a straight line through the two intersection points. This line crosses AB at its exact midpoint and meets it at 90∘. Every point on this bisector is equidistant from points A and B.
2. Angle bisector:
- Place the compass point on vertex B of ∠ABC and draw an arc that cuts both arms at points X and Y.
- Place the point at X and strike an arc in the interior of the angle.
- Without changing the radius, place the point at Y and draw an arc crossing the first one at point Z.
- Draw a straight line from B through Z. This line cuts ∠ABC into two equal halves. Every point on BZ is equidistant from the arms BA and BC.
Worked example
A recreation park in Kingston has two boundary fences meeting at corner B, forming ∠ABC=70∘. A pathway starts at B and runs so that every point along it is equidistant from both fences BA and BC. What is the measure of the angle between the pathway and the fence BA?
- A path equidistant from two intersecting lines lies along the angle bisector of the angle between them.
- The angle bisector divides ∠ABC into two equal parts.
- Angle measure =270∘=35∘.
Answer: 35°
Quick check
Line segment PQ is 8 cm long. Its perpendicular bisector intersects PQ at point M. What is the length of PM and the angle between PQ and the bisector?
2. Constructing Standard Angles
CSEC requires you to construct key angles without a protractor by using circles and bisectors:
- **60∘ and 120∘:** Draw a base line with vertex A. Strike a large arc centred at A, cutting the line at P. With the same radius, place your compass at P and cut the arc at Q. Drawing a line from A through Q creates an angle of 60∘ (the angle of an equilateral triangle). Placing the compass at Q with the same radius and cutting the arc further gives 120∘.
- **30∘:** Bisect a 60∘ angle.
- **90∘:** Construct a perpendicular at a point on a line, or bisect the angle between the 60∘ and 120∘ marks.
- **45∘:** Bisect a 90∘ angle.
- Combinations: Bisecting between 90∘ and 60∘ gives 75∘; bisecting between 90∘ and 120∘ gives 105∘; bisecting between 90∘ and 180∘ gives 135∘.
Worked example
Explain how to construct an angle of 150∘ using only a straight edge and compasses.
- Construct a straight line passing through vertex A, which represents 180∘.
- At point A, construct an angle of 120∘ above the line. The remaining angle along the straight line is 180∘−120∘=60∘.
- Bisect this remaining 60∘ angle to get two 30∘ angles.
- Add one of the 30∘ sections to 120∘: 120∘+30∘=150∘.
Answer: Construct 120° and add the bisector of the adjacent 60° (or bisect the region between 120° and 180°).
Quick check
If you construct a right angle (90∘) and then construct the angle bisector between the 60∘ line and the 90∘ line, what is the size of the resulting angle measured from the base line in degrees?
3. Constructing Triangles and Polygons
To construct triangles or quadrilaterals, combine your angle constructions with measured lengths:
1. Draw a rough sketch first: Always label given lengths and angles on a rough diagram to plan your steps.
2. Draw the baseline: Draw a straight line longer than needed using your ruler, mark your starting point, and use your compasses set to the exact length to mark off the base segment.
3. Construct angles at vertices: Construct required angles (such as 90∘, 60∘, or 30∘) using arcs.
4. Mark off side lengths: Set compasses to the required length from your ruler, place the point on the vertex, and cut the ray at the given distance.
5. Complete the polygon: Join the vertices with straight lines.
*Tip:* Never erase your construction arcs. CSEC examiners award method marks specifically for seeing clean, intersecting arcs.
Worked example
Using a ruler and compasses only, construct triangle PQR where PQ=7 cm, ∠QPR=60∘, and PR=5 cm. Calculate the perimeter of the triangle if the measured length of QR is 6.2 cm.
- Draw a straight line and mark off PQ=7 cm using compasses.
- At point P, construct an angle of 60∘ by swinging an arc of radius r from P cutting PQ at S, then from S cutting the arc at T. Draw a ray from P through T.
- Set the compass width to 5 cm, place the point at P, and cut the 60∘ ray at R so that PR=5 cm.
- Join point R to point Q with a straight line.
- Perimeter =PQ+PR+QR=7 cm+5 cm+6.2 cm=18.2 cm.
Answer: 18.2 cm
Quick check
You are constructing a rectangle ABCD where AB=8 cm and BC=5 cm. Outline the four main construction steps using ruler and compasses only.
Common mistakes
- Erasing construction arcs: Students often clean up their drawing and erase arcs, which loses all construction method marks. Always leave every arc clearly visible.
- Using a protractor when the question specifies 'using ruler and compasses only': CXC awards zero marks for angle construction if protractor markings or lack of arcs show the protractor was used.
- Using a blunt pencil or loose compass hinge: A slipping compass or thick lines lead to measurement errors greater than the ±1 mm or ±1∘ tolerance allowed.
In the exam
- Ensure your compass hinge is stiff and your pencil is sharpened to a fine point before entering the exam room.
- Check all constructed lengths and angles with your ruler and protractor after finishing your compass construction to verify accuracy within ±1 mm and ±1∘.
Key terms
- Perpendicular Bisector
- A line that divides a line segment into two equal lengths at an angle of 90°.
- Angle Bisector
- A ray that divides an angle into two equal angles, forming the locus of points equidistant from both arms.
- Equidistant
- At an equal distance from two or more points or lines.
Practice
Easier to harder. Use paper for your working.
Practice 1
Which combination of steps correctly produces an angle of 45∘ at vertex A?
Practice 2
In triangle ABC, ∠ABC=90∘ and ∠BAC=60∘. What is the measure of the third angle ∠ACB in degrees?
Practice 3
A plot of land WXYZ is a trapezium where WX is parallel to ZY. Explain how to construct a line through point Z parallel to WX using a ruler and set square.
Now try real past-paper questions
3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.
- Mathematics Q3 3(b)(i) · 1 markA sports club owns a field PQRS, a quadrilateral. A scale diagram (1 cm = 10 m) is provided. The field is to be divided with a fence from P to side RS, such that each point on the…
- Mathematics Q3 3(a) · 4 marksThis section requires geometric construction. Using a ruler, a pencil and a pair of compasses only, construct the triangle NLM, in which LM = 12 cm, ∠MLN = 30° and ∠LMN = 90°.…
- Mathematics Q3 3(a) · 4 marksThis question involves geometric constructions and trigonometry. Using a ruler, a pencil and a pair of compasses, construct the right-angled triangle ABC, such that AB = 5 cm,…
Finished the lesson?
0 of 6 checks right on this device.
Read more
- CSEC Maths Study Guide - Maths Crash Course, pp. 225, 226
- Collins - Concise Revision Course for CSEC Mathematics, pp. 186, 198, 204
- Mathematics for CSEC, pp. 490, 491, 501
- CXC Study Guide - Mathematics for CSEC, pp. 146, 147