Quelpr

CSEC Mathematics · statistics

Class Features of Grouped Data

Find class limits, class boundaries, midpoints, and class widths to analyse grouped frequency distributions accurately.
12 min Syllabus: determine class intervals, boundaries, limits, midpoints, and widths for grouped data

Before you start

In earlier lessons, you created frequency tables to count how often individual values appear in a data set.

Builds on: Frequency Tables

1. Class Limits vs Class Boundaries

When a data set has many different values—such as test marks from schools across Trinidad or the masses of mangoes picked for market—we group the values into class intervals (for example, 10−19, 20−29, 30−39).

Each class interval has two key pairs of borders:

  • Class Limits: The smallest and largest raw data values that can go into that class. For 10−19, the Lower Class Limit (LCL) is 10 and the Upper Class Limit (UCL) is 19.
  • Class Boundaries: The true continuous dividing lines that close the gap between consecutive classes. Notice the gap of 1 unit between 19 and 20. We split this gap in half: 21​=0.5.

To find class boundaries for integer data:

Lower Class Boundary (LCB)=Lower Class Limit−0.5
Upper Class Boundary (UCB)=Upper Class Limit+0.5

For 10−19, the boundaries are 9.5 and 19.5. The next class, 20−29, starts right at 19.5, leaving no gap.

A number line from 9 to 21 showing class limits at 10 and 19, class boundaries at 9.5 and 19.5, and the midpoint at 14.5.9101112131415161718192021

Worked example

A vendor at the Castries market in Saint Lucia weighs crates of citrus fruits to the nearest whole kilogram. The grouped frequency table includes the class interval 30−39 kg. State the lower class limit, upper class limit, lower class boundary, and upper class boundary for this interval.

  1. Identify the lowest and highest whole numbers in the class interval: LCL=30, UCL=39.
  2. Find half the unit gap between consecutive classes: 21​=0.5.
  3. Subtract 0.5 from the lower limit: LCB=30−0.5=29.5 kg.
  4. Add 0.5 to the upper limit: UCB=39+0.5=39.5 kg.

Answer: Lower limit = 30 kg, Upper limit = 39 kg, Lower boundary = 29.5 kg, Upper boundary = 39.5 kg.

Quick check

State the lower class boundary for the class interval 40−49.

2. Class Midpoint and Class Width

Once you know the limits and boundaries of a class, you can find two essential measures:

1. **Class Midpoint (or Class Mark, x)**:
This is the middle value of the class, used to represent all values in that group when estimating the mean.

Midpoint=2Lower Limit+Upper Limit​

2. Class Width (or Class Interval Size):
This is the total span of values covered by the class. You must calculate this using the boundaries, not the limits!

Class Width=Upper Class Boundary−Lower Class Boundary

*Common trap*: If you calculate 19−10, you get 9, which is incorrect. The class 10−19 actually contains 10 whole numbers (10,11,12,13,14,15,16,17,18,19). Using the boundaries gives the correct width: 19.5−9.5=10.

Worked example

For the class interval 50−59 in a Caribbean secondary school examination, calculate:
(a) the class midpoint
(b) the class width.

  1. To find the midpoint, take the average of the limits: 250+59​=2109​=54.5.
  2. Determine the boundaries: LCB=50−0.5=49.5 and UCB=59+0.5=59.5.
  3. Subtract the lower boundary from the upper boundary: Class Width=59.5−49.5=10.

Answer: (a) Midpoint = 54.5, (b) Class width = 10.

Quick check

For the class interval 1−10, state the class width.

3. Allocating Values into Class Intervals

In real life, measurements like time, weight, and distance are continuous, even if a table displays whole-number intervals. A measurement belongs to a class interval if it falls within the interval's boundaries:

Lower Boundary≤value<Upper Boundary

For example, consider the classes 1−10 and 11−20:

  • The boundaries for 1−10 are 0.5 to 10.5.
  • The boundaries for 11−20 are 10.5 to 20.5.

A continuous value of 10.4 lies between 0.5 and 10.5, so it belongs to the interval 1−10. A value of 10.8 lies between 10.5 and 20.5, so it belongs to the interval 11−20.

Worked example

A track-and-field coach in Kingston groups 100-metre sprint times into the intervals 10−14 s, 15−19 s, and 20−24 s. Determine the class interval in which a recorded time of 14.3 seconds lies.

  1. Find the boundaries for the class 10−14: LCB=10−0.5=9.5, UCB=14+0.5=14.5.
  2. Check if 14.3 falls within these boundaries: 9.5≤14.3<14.5.
  3. Since 14.3 is less than 14.5, it belongs to the class 10−14.

Answer: The time of 14.3 seconds lies in the class interval 10−14.

Quick check

A continuous measurement of 29.4 is recorded. In which class interval does it belong?

Common mistakes

  • Subtracting class limits to find class width (e.g., writing 29−20=9 instead of 29.5−19.5=10). Always subtract the boundaries.
  • Confusing class limits with class boundaries. Limits are the whole numbers written in the table headings; boundaries include the .5 extensions to close gaps.
  • Forgetting to divide by 2 when finding the midpoint. Adding the limits gives the sum, not the middle value.

In the exam

  • In Paper 2 grouped-data questions, CSEC often awards 1 mark simply for stating the correct class boundaries or class width. Write out UCB−LCB explicitly.
  • When asked for class midpoints to calculate the mean, include a dedicated column labelled 'x' in your table and show at least one working step.
  • Always check units: if the interval is given in cm, grams, or seconds, include the unit in your final statement.

Key terms

Class Limits
The smallest and largest recorded values that can belong to a particular class interval.
Class Boundaries
The actual values that separate one class from the next without leaving gaps.
Class Midpoint
The exact centre of a class interval, calculated as (Lower Limit + Upper Limit) ÷ 2.
Class Width
The difference between the upper class boundary and the lower class boundary of an interval.

Practice

Easier to harder. Use paper for your working.

Practice 1

State the lower class boundary for the class interval 20−29.

Practice 2

For the class interval 21−30, state the class width.

Practice 3

A test score table lists the intervals 1−10, 11−20, 21−30, and 31−40. In which class interval would a score of 20.4 lie?

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q7 7(b)(ii) · 1 markFor the class interval 21-30, state the class width.
  • Mathematics Q7 7(a)(ii) · 1 markThe table shows scores obtained by 100 children in a competition, with columns for Score, Class mid-point (x), Frequency (f), and f x x. State the class interval in which a score…
  • Mathematics Q7 7(b) · 1 markState the lower boundary for the class interval 20 - 29.

Finished the lesson?

0 of 6 checks right on this device.

Read more

  • Collins - Concise Revision Course for CSEC Mathematics, pp. 391, 392
  • CXC Study Guide - Mathematics for CSEC, p. 61
  • Mathematics for CSEC, p. 506
  • CSEC Maths Study Guide - Maths Crash Course, p. 99