Quelpr

CSEC Mathematics · measurement

Area of a Triangle Using Trigonometry

Calculate the area of any triangle when you know two sides and the angle trapped between them using the sine formula.
12 min Syllabus: calculate triangle area given two sides and the included angle using trigonometry

1. The Sine Area Formula and the Included Angle

In earlier grades, you found the area of a triangle using

Area=21​×base×perpendicular height

That formula works easily when you have a right-angled triangle or when the vertical height is drawn for you. But what if you are only given the slant sides? Trigonometry gives us a powerful alternative.

Look at any triangle ABC. If we drop a perpendicular line of height h from vertex B to the base b, basic trigonometry tells us that sinC=ah​, which means h=asinC. Replacing h in the standard area formula gives:

Area=21​absinC

To use this formula, you need two sides and the included angle — the angle trapped directly between those two sides (often called the SAS condition: Side-Angle-Side). No matter which letters are used on the triangle, the rule is always the same:

Area=21​×(side1​)×(side2​)×sin(included angle)
Triangle ABC with base b, side a, included angle C, and a dashed perpendicular height h.CABDCbah

Worked example

Calculate the area of △PQR where PR=14 cm, PQ=9 cm, and ∠QPR=40∘. Give your answer correct to 3 significant figures.

Triangle PQR with side PR = 14 cm, side PQ = 9 cm, and angle QPR = 40 degrees.PRQ40°14 cm9 cm
  1. Identify the two known sides and the included angle: PR=14 cm, PQ=9 cm, and the trapped angle at P is 40∘.
  2. Write the formula: Area=21​×PR×PQ×sinP
  3. Substitute the values: Area=21​×14×9×sin(40∘)
  4. Calculate: Area=63×0.642788...=40.4956... cm2
  5. Round to 3 significant figures: 40.5 cm2

Answer: 40.5 cm²

Quick check

In △KLM, the lengths KL=12 cm and LM=15 cm are known. Which angle must you be given to calculate the area directly with the formula 21​absinC?

2. Triangles with Obtuse Angles

In CSEC exam questions, the included angle is very often an obtuse angle (an angle between 90∘ and 180∘).

The sine rule for area works exactly the same way for obtuse angles because the sine of an obtuse angle is positive:

sin(180∘−θ)=sinθ

For instance, sin(125∘)=sin(55∘)≈0.8192. Your scientific calculator handles this automatically as long as it is set to DEG (degree mode).

When writing your final answer:

  • Check that your calculator displays D or DEG, not R (radians).
  • State your answer to 3 significant figures unless the question specifies a different accuracy (such as 1 decimal place).
  • Always include the square units (e.g. cm2, m2, km2).

Worked example

A surveyor in May Pen, Jamaica, is measuring a triangular plot of land ABC. The boundary fence BC is 82 m, the fence BA is 65 m, and ∠ABC=125∘. Calculate the area of the plot to 1 decimal place.

Triangle ABC with side BC = 82 m, side BA = 65 m, and obtuse angle B = 125 degrees.BCA125°82 m65 m
  1. Check the setup: we have two side lengths and the obtuse angle between them at B.
  2. State the formula: Area=21​acsinB
  3. Substitute the given numbers: Area=21​×82×65×sin(125∘)
  4. Multiply the sides: 21​×5330=2665
  5. Evaluate the sine: 2665×0.819152...=2183.04... m2
  6. Round to 1 decimal place as requested: 2183.0 m2

Answer: 2183.0 m²

Quick check

A triangle has side lengths of 10 cm and 16 cm with an included angle of 150∘. Calculate the area of the triangle.

cm^2

3. Applied Problems and Bearings

In Paper 2, triangle area questions frequently form the final part of a trigonometry and bearings problem.

Two vessels or aircraft depart from the same starting point along different bearings. Their paths and the direct line between them form a triangle:

  • The distances travelled form the two side lengths.
  • The included angle is the angle between the two directions. Subtract the smaller bearing from the larger: if this difference is ≤180∘, that is the included angle; if the difference is greater than 180∘, the included angle is 360∘ minus the difference.

For example:

  • For bearings of 035∘ and 105∘, the included angle is:
105∘−035∘=70∘
  • For bearings of 040∘ and 310∘, the difference is 310∘−040∘=270∘, so the included angle across the North line is:
360∘−270∘=90∘

Once you have found the included angle, you can immediately apply Area=21​absinC.

Worked example

Two patrol boats leave the Coast Guard base at point O. Boat P travels 40 km on a bearing of 035∘. Boat Q travels 55 km on a bearing of 105∘.
(a) Determine the angle ∠POQ between their courses.
(b) Calculate the area of the sea sector △POQ, correct to 3 significant figures.

Triangle POQ formed by bearings from origin O to patrol boat P at 40 km and patrol boat Q at 55 km.NOPQ70°40 km55 km
  1. Part (a): Find the angle between the two bearings: ∠POQ=105∘−35∘=70∘.
  2. Part (b): State the area formula: Area=21​×OP×OQ×sin(∠POQ)
  3. Substitute lengths and angle: Area=21​×40×55×sin(70∘)
  4. Compute: 1100×0.93969...=1033.66... km2
  5. Round to 3 significant figures: 1030 km2

Answer: (a) 70°, (b) 1030 km²

Quick check

Two straight roads branch out from a junction J. Road A leads to Village 1, which is 12 km away. Road B leads to Village 2, which is 15 km away. The angle between the two roads at junction J is 30∘. Calculate the area of the triangular region between the roads and the two villages.

km^2

Common mistakes

  • Using an angle that is not the included angle: You cannot use just any angle given in the diagram. The angle must be the one 'sandwiched' between the two side lengths you are multiplying.
  • Calculator in Radian mode: If your calculator is set to 'RAD', entering sin(30∘) gives −0.988 instead of 0.5. Always check for the small 'D' or 'DEG' icon on your screen before calculating.
  • Forgetting the factor of 1/2: Multiplying absinC gives double the correct area. Write out the full formula with 21​ at the start of your working every time.
  • Using linear units instead of square units: Writing cm or m instead of cm2 or m2 loses the final mark in CSEC Measurement questions.

In the exam

  • Write the formula first: CSEC awards a Method Mark (M1) for writing Area=21​absinC and substituting the numbers correctly, even if you make a calculation slip later.
  • Stick to 3 significant figures: Unless the question specifically requests otherwise (e.g. 'correct to 1 decimal place'), standard CSEC examination instructions require answers to be rounded to 3 significant figures.
  • Sanity check: Since the sine of any angle between 0∘ and 180∘ is at most 1, your answer must always be less than or equal to 21​ab.

Key terms

Included Angle
The angle formed at the vertex where two specified sides meet — the angle trapped between them.
SAS (Side-Angle-Side)
A geometric configuration where two sides and the angle between them are known.
Oblique Triangle
Any triangle that does not contain a right angle (it can be acute or obtuse).

Practice

Easier to harder. Use paper for your working.

Practice 1

In △DEF, DE=8 cm, EF=11 cm, and the included angle ∠E=60∘. Calculate the area of △DEF, correct to 1 decimal place.

cm^2

Practice 2

A triangular piece of zinc sheet has two sides measuring 14 m and 19 m with an obtuse angle of 130∘ between them. Which value gives its area to the nearest whole square metre?

Practice 3

A metal sign is in the shape of a rhombus ABCD with sides of length 18 cm and an acute interior angle ∠DAB=50∘. The diagonal BD divides the rhombus into two identical triangles. Calculate the total area of the rhombus to 3 significant figures.

Rhombus ABCD with side length 18 cm, angle DAB = 50 degrees, and diagonal BD shown dashed.ABCD50°18 cm18 cm18 cm18 cm
cm^2

Now try real past-paper questions

3 Paper 2 questions on this topic. Quelpr marks your working point by point, like an examiner.

  • Mathematics Q10 10(b)(i)b) · 2 marksThe diagram below, not drawn to scale, shows the positions of three points, P, Q and R on a horizontal plane. PQ = 120 km, PR = 150 km and ∠QPR = 23°. Calculate, correct to one…
  • Mathematics Q10 10(b)(i)b) · 2 marksThe diagram shows the position of three points A, B and C on a horizontal plane. AB = 174 metres, BC = 65 metres and AC = 226 metres. Calculate the area of triangle ABC.
  • Mathematics Q12 12(b)(i) · 3 marksUse π = 3.14. Given that GC = 4 cm. Calculate the area of triangle GCH.

Finished the lesson?

0 of 6 checks right on this device.

Read more

  • Mathematics for CSEC, pp. 473, 557
  • CSEC Maths Study Guide - Maths Crash Course, p. 73
  • precalculus-2e_-_WEB, p. 783
  • algebra-and-trigonometry-2e_-_WEB, p. 886